Ыoperation; Memory Channel Selection; Memory Programming; Memory Operation - Icom IC-1275A Instruction Manual

MEMORY OPERATION ©
6-1 Memory channel selection 6-3 Memory data transferring
(1) In VFO mode:
The memory channel contents are transferred to the
selected VFO.
(2) In MEMORY mode:
The memory channel contents are transferred to the
VFO used immediately before transferring to ME-
MORY mode.
1) Push [MEMO] to select MEMORY mode.
e "MEMO" appears.
MEMO
(stored contents)
The operating frequency, mode, subaudible tone frequency
1) Select the desired operating frequency and mode.
contents)
2) Rotate [DN MEMO UP] to select the desired memory
3) Push and hold [MW] until the speaker emits 3 beep
tones.
e The information is now programmed.
MW
MEMORY
(displayed
contents)
VFO
eThe contents of the selected memory channel are
displayed. | Push and hold
[M » VFO]
MEMORY
(displayed
contents)
VFO
(stored contents)