Texa Bike and Marine Diagnostic system – set up and Install with USB drive.
PLEASE READ!
Texa Bike and Marine Diagnostic system – set up and Install – PLEASE READ!
Software is enclosed on a USB stick.
1 You will not be able to perform any software installation until you have received your delivery with the green usb license key.
2 Please install Team Viewer so we may assist remotely with technical assistance and training. www.teamviewer.com - Free version for personal use.
3 Turn off/disable Microsoft One Drive for the entirety of this process.
4 ENSURE ANTIVIRUS/SECURITY SYSTEMS ARE OFF FOR THE DURATION OF THE INSTALL AND ANY REQUIRED REBOOTS.
5 ENSURE ALL WINDOWS UPDATES ARE COMPLETE PRIOR TO INSTALL.
6 The green usb license key must be in the PC when installing the software.
Information below will assist with easy set up and installation. Following these instructions will allow a trouble-free installation.
We recommend copying this document to your computer for easy access if needed in the future.
When you receive your delivery, included in the case for the unit is your green USB security/ License key. DO NOT lose this.
It must be in the pc whenever you use the program. To download the software - See page 2.
Once the software is installed, it can be configured for communication with your TXB hardware via bluetooth or usb cable.
Do not use windows to configure Bluetooth! Follow the instruction given in this document.
Once set up, on first connection to a vehicle the system will attempt warranty registration via internet. Ensure your pc has internet connectivity.
Please DO NOT USE the global scan function for the first connection, the warranty registration will not complete unless you use one of the standard systems,
such as Petrol injection.
Please ensure you view and/or print the basic demo instructions, and cable selection instructions. This will give you an introduction to using the basic
functions of the software.
Once you have had a few days to familiarize yourself with the basics, we recommend arranging a remote training session to offer some further basic training
over the internet using team viewer remote software. Contact us to arrange a suitable day and time and we will email details of the screen sharing software.
You may also wish to subscribe you our
youtube
channel and
facebook
pages.
www.moto-tech.com.au TEL: 0405 548 757
1
Need help?
Do you have a question about the TXB 2 and is the answer not in the manual?
Questions and answers