Turning Off Your Computer; Before Working Inside Your Computer - Dell Inspiron 530b Owner's Manual

Inspiron 530 series
Table of Contents

Advertisement

Turning Off Your Computer

NOTICE:
programs before you turn off your computer.
1 Save and close any open files and exit any open programs.
2 Click Start
The computer turns off after the operating system shutdown process finishes.
3 Ensure that the computer and any attached devices are turned off. If your
computer and attached devices did not automatically turn off when you
shut down your operating system, press and hold the power button for at
least 8-10 seconds until the computer turns off.

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from
potential damage and to help to ensure your own personal safety.
CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
or contacts on a card. Hold a card by its edges or by its metal mounting bracket.
Hold a component such as a processor by its edges, not by its pins.
NOTICE:
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
NOTICE:
on the cable itself. Some cables have connectors with locking tabs; if you are
disconnecting this type of cable, press in on the locking tabs before you disconnect
the cable. As you pull connectors apart, keep them evenly aligned to avoid bending
any connector pins. Also, before you connect a cable, ensure that both connectors
are correctly oriented and aligned.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer
and then unplug the cable from the network device.
1 Disconnect all telephone or network cables from the computer.
NOTICE:
before you service the computer.
2 Disconnect your computer and all attached devices from their electrical
outlets.
106
Removing and Installing Parts
To avoid losing data, save and close all open files and exit all open
, click the arrow
Before you begin any of the procedures in this section, follow the
Handle components and cards with care. Do not touch the components
Only a certified service technician should perform repairs on your
When you disconnect a cable, pull on its connector or on its pull-tab, not
To avoid damaging the system board, you must remove the main battery
and then click Shut Down.
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents