Download Print this page

Source SEM-EXB-P04 Installation Instructions

Slim emergency exit box

Advertisement

Quick Links

DISASSEMBLY INSTRUCTIONS
Product end of life instruction.
This Lighting product is in the scope of EU 2019/2020 directive on Waste Electrical and Electronic Equipment
(WEEE). This product must be disposed of, according to the legislation. This document is intended for use by
end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life
treatment for the components and materials of the product.
Please follow pictured diagram on the back of this manual showing how to dismantle the product into different
components which should be disposed of correctly. These components consist of plastic, metal and electronic
D/LI/3M/ST]
materials.
It is the responsibility of the end user to dispose of this product correctly. Contact www.weeeireland.ie or your
local council for further information.
ase check here, if there is screw, please
se them firstly
Slide block to open
Product Code:[AWLED/LI/3M/ST]
Dismantle Driver/LED, Plate/Battery
Unswitched Line
Earth
Line
Ansell Electrical Products
Neutral
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Dismantle Legend and Led Plate
Warrington,
Ansell Electrical Products
WA3 3JD
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Warrington Tel: +44 (0)1942 433333
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
For more information contact:
Unit 7/8 Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland, A84 YP58,
Ansell Electrical Products
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Phone:
00353 1 835 7447
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
Website:
Ansell (Sales & Distribution
Loosen screws with
screwdriver
Dismantle driver/LED
plate/battery
Unswitched Line
Earth
Unswitched Line
Line
Earth
Neutral
Line
Neutral
Dismantle legend and Led
plate
Ansell (Sales & Distribution
Unit 2, M2 Business Park,
Unswitched Line
Duncrue Street,
Earth
Belfast,
Line
Ansell (Sales & Distribution
BT3 9AQ
Unit 2, M2 Business Park,
Neutral
Duncrue Street,
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Belfast,
BT3 9AQ
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Ansell (Sales & Distribution
Unit 2, M2 Business Park,
Duncrue Street,
Belfast,
BT3 9AQ
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Spain Tel: 00 34 938 005642
www.sgd.ie
Issue Number: [1]
IP20
years
Quality
Assurance
SAFETY
This is a mains powered product. It must be installed by a qualified electrician and in accordance with
applicable building and electrical regulations. Before installation or maintenance, the electrical supply to the
Slide
the
block
to
product must be isolated.
"Open"
WARRANTY
This product has a 5 year warranty. This warranty does not include batteries or fuses. There is a 3 year
warranty for the LiFe P04 Battery.
OPERATION / MAINTENANCE
1. P04 LIFE batteries should be changed after 3 years.
2. This luminaire MUST be disconnected before it is subjected to any high voltage or insulation resistance
testing.
3. Ensure cleanliness of luminaire is maintained so as not to affect performance.
During Non-Maintained Mode if the battery is faulty the LED indicator will light red and beep.
Note:
AC power will not cause luminaire to enter Emergency mode
After a repair, please connect AC power and perform a test (for performance confirmation). To do
this, operate your emergency key switch.
If the battery and LED board failure simultaneously, the red LED will flash.
Any beep sound will stop after correct maintenance or repair.
Manual testing will not affect the monthly and half-yearly testing schedule
SEM-EXB P04 WIRING DIAGRAM
FOR MAINTAINED OPERATION
(NON-SWITCHABLE)
Spain Tel: 00 34 938 005642
Issue Number: [1]
Spain Tel: 00 34 938 005642
KEEP
Issue Number: [1]
LINK WIRE
COMPLIANT
Installation & Instructions
SLIM EMERGENCY EXIT BOX
PRODUCT CODE: SEM-EXB-P04
FOR MAINTAINED OPERATION
(SWITCHABLE)
BLUE
BLUE
BROWN
BLACK
BROWN
GREEN & YELLOW
GREEN & YELLOW
REMOVE LINK WIRE
FOR NON-MAINTAINED OPERATION
BLUE
BROWN
GREEN & YELLOW
REMOVE LINK WIRE

Advertisement

loading
Need help?

Need help?

Do you have a question about the SEM-EXB-P04 and is the answer not in the manual?

Questions and answers

Summary of Contents for Source SEM-EXB-P04

  • Page 1 Assurance Please follow pictured diagram on the back of this manual showing how to dismantle the product into different PRODUCT CODE: SEM-EXB-P04 components which should be disposed of correctly. These components consist of plastic, metal and electronic D/LI/3M/ST] materials.
  • Page 2 Product Code:[AWLED/LI/3M/ST] Important Installation Information SEM-EXB P04 INSTALLATION Installation should be carried out in accordance with the current edition of the National Wiring Regulations. If in doubt, consult a qualified electrician Maximum Input Voltage - 220V-240V AC 50/60Hz Connect the battery pack to the PCB by connecting the female socket on the battery wires to the male plug mounted on the PCB, ensuring the correct orientation Ensure that all electrical connections are tight with no loose strands Before commencing installation or maintenance, ensure electricity is switched off at the mains.
  • Page 3 This declaration of conformity is issued under the sole responsibility of the manufacturer. Product Description: Emergency Exit Box 220-240, 50/60Hz, 4W Class 1, IP20, ta: 40 Model Code: SEM-EXB P04 The product/model of the declaration described above is in conformity with the relevant Community harmonisation legislation.