Source SEM-EXB-P04 Installation Instructions

Slim emergency exit box

Advertisement

DISASSEMBLY INSTRUCTIONS

Product end of life instruction.
This Lighting product is in the scope of EU 2019/2020 directive on Waste Electrical and Electronic Equipment
(WEEE). This product must be disposed of, according to the legislation. This document is intended for use by
end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life
treatment for the components and materials of the product.
Please follow pictured diagram on the back of this manual showing how to dismantle the product into different
components which should be disposed of correctly. These components consist of plastic, metal and electronic
D/LI/3M/ST]
materials.
It is the responsibility of the end user to dispose of this product correctly. Contact www.weeeireland.ie or your
local council for further information.
ase check here, if there is screw, please
se them firstly
Slide block to open
Product Code:[AWLED/LI/3M/ST]
Dismantle Driver/LED, Plate/Battery
Unswitched Line
Earth
Line
Ansell Electrical Products
Neutral
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Dismantle Legend and Led Plate
Warrington,
Ansell Electrical Products
WA3 3JD
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Warrington Tel: +44 (0)1942 433333
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
For more information contact:
Unit 7/8 Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland, A84 YP58,
Phone:
00353 1 835 7447
Ansell Electrical Products
Unit 6B, Stonecross Industrial Park,
Yew Tree Way,
Unit 32 Junction One Business Park, Valley Road, Birkenhead, Merseyside, UK, CH41 7ED,
Warrington,
WA3 3JD
Warrington Tel: +44 (0)1942 433333
UK Ph:
0330 551 7000
Website:
Ansell (Sales & Distribution
Loosen screws with
screwdriver
Dismantle driver/LED
plate/battery
Unswitched Line
Earth
Unswitched Line
Line
Earth
Neutral
Line
Neutral
Dismantle legend and Led
plate
Ansell (Sales & Distribution
Unit 2, M2 Business Park,
Unswitched Line
Duncrue Street,
Earth
Belfast,
Line
Ansell (Sales & Distribution
BT3 9AQ
Unit 2, M2 Business Park,
Neutral
Duncrue Street,
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Belfast,
BT3 9AQ
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Ansell (Sales & Distribution
Unit 2, M2 Business Park,
Duncrue Street,
Belfast,
BT3 9AQ
Belfast Tel: +44 (0)2890 773750
International Tel: +44 (0)1942 433343
Spain Tel: 00 34 938 005642
Issue Number: [1]
www.sgd.ie
IP20
years
Quality
Assurance
Self Test Method: Please ensure this product is tested monthly and half yearly
Slide
the
block
to
MODE
METHOD FOR
"Open"
Mains ON
No Action Needed
No Action Needed
No Action Needed
Monthly self
test battery
discharge
(discharges
the battery for
10 seconds)
Half yearly self
test battery
discharge
(discharges
the battery for
3 hours)
Mains Failure
No action needed
Luminaire enters
3 hour emergency
*During Non-Maintained Mode if the battery is faulty the LED indicator will light red and beep. If the LEDs on the heads are faulty,
this will be only shown on monthly self test and not before. SEM-EXB P04 has different wiring to SEM-EXB-NI
Note:
No AC power will cause luminaire to enter Emergency mode
After a repair, please connect AC power and perform a test (for performance confirmation). To do this, operate your emergency key
switch.
If the battery and LED board failure simultaneously, the red LED will flash.
Any beep sound will stop after correct maintenance or repair.
Manual testing will not affect the monthly and half-yearly testing schedule
Spain Tel: 00 34 938 005642
Self Test
Issue Number: [1]
Spain Tel: 00 34 938 005642
LED Light Status
Issue Number: [1]
Green LED Constant
Red LED (flashes every 1 second)
Amber LED (flashes every 1 second)
Mains Failure
COMPLIANT
Installation &

Self Test Instructions

SLIM EMERGENCY EXIT BOX
PRODUCT CODE: SEM-EXB-P04 / SEM-EXB-NI
IF
LED INDICATOR STATUS
MODE
Battery Ok
Green (Permanently On)
Battery Fault
Red (Flashes every 1 second)
LED Fault*
Amber (Flashes every 1
second)*
Self Testing
Battery Ok
All Indicators Off
Battery Fault
Red (Flashes every 1 second)
LED Fault
Amber (Flashes every 1 Second)
Self Testing
Battery Ok
All Indicators Off
Battery Fault
Red (Flashes every 1 second)
LED Fault
Amber (Flashes every 1 Second)
Battery Ok
All Indicators Off
mode
Beep Sound
Status
OFF
Battery Charging, No faults, Mains On
Beep every 45 seconds
Battery Fault
Beep every 45 seconds
LED Fault
No indicator
Check Power Supply
BEEP SOUND
RESULT
OFF
Green LED
Beep every 45
Red LED, Loud Beep
Seconds*
sound*
Beep every 45
Amber LED, Loud Beep
Seconds*
Sound
OFF
Green LED
Beep every 45
Red LED, Loud Beep
seconds
sound
Beep every 45
Amber LED, Loud Beep
seconds
Sound
OFF
Green LED
Beep every 45
Red LED, Loud Beep
seconds
sound
Beep every 45
Amber LED, Loud Beep
seconds
Sound
OFF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEM-EXB-P04 and is the answer not in the manual?

Questions and answers

Summary of Contents for Source SEM-EXB-P04

  • Page 1 Assurance Please follow pictured diagram on the back of this manual showing how to dismantle the product into different PRODUCT CODE: SEM-EXB-P04 / SEM-EXB-NI components which should be disposed of correctly. These components consist of plastic, metal and electronic D/LI/3M/ST] materials.
  • Page 2 Unswitched Line Important Installation Information Earth Line Neutral Installation should be carried out in accordance with the current edition of the National Wiring Regulations. Unswitched Line Earth If in doubt, consult a qualified electrician Line Maximum Input Voltage - 220V-240V AC 50/60Hz Neutral Connect the battery pack to the PCB by connecting the female socket on the battery wires to the male plug mounted on the PCB, ensuring the correct orientation...
  • Page 3 Declaration Number: 094 -SEM-EXB NI 6500K IP20 Ni-cad Maintained/Non maintained Exit Sign This declaration of conformity is issued under the sole responsibility of the manufacturer. Products: SEM-EXB NI 6500K IP20 Ni-cad Maintained/Non maintained Exit Sign Model Number: SEM-EXB NI The product/model of the declaration described above is in conformity with the relevant Community harmonisation legislation: Low Voltage Directive (2014/35/EU) EMC (2014/30/EU)

This manual is also suitable for:

Sem-exb-ni

Table of Contents