Ego Power+ CS1200E Instruction Manual page 7

SPECIFICATIONS
Rated Voltage
Max. Chain Speed
Chain Pitch
Chain Gauge
Guide Bar Length
Saw Chain Model
Guide Bar Model
Saw Chain & Bar Kit Model
Chain Oil Tank Capacity
Weight (without battery pack, saw
chain, guide bar, side cover, oil and
chain sheath)
Recommended Operating
Temperature
Recommended Storage
Temperature
Recommended Charging
Temperature
Measured sound power level L
WA
Sound pressure level at working
position L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
Front handle
Vibration a
h
Rear handle
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
56 VOLT LITHIUM-ION CORDLESS TOP HANDLE CHAIN SAW — CS1200E
PACKING LIST (FIG.A1)
DESCRIPTION
56V
20 m/s
KNOW YOUR CHAIN SAW (Fig. A1)
1/4" (6.4 mm)
1. Guide Bar
1.1mm
2. Saw Chain
300 mm
3. Chain-kickback Brake Paddle
AC1204Q
4. Rear Handle
(Recommended)
5. Front Handle
AC1000Q
(Compatible)
6. Oil-inspection Window
AG1000Q
7. Oil Tank Cap
(Compatible)
8. Locking Tongue
AK1204Q
9. Trigger Switch
(Recommended)
10. Battery-release Button
150 ml
11. Side Cover
1.9 kg
12. Bar Nut
13. Tensioning Screw
14. Lubricating Hole
-15°C-40°C
15. Chain Sheath
-20°C-70°C
16. Lanyard Hanger
17. Combi-wrench
5°C-40°C
ASSEMBLY
97 dB(A)
K=3.6 dB(A)
89 dB(A)
ASSEMBLING/REPLACING THE BAR AND CHAIN
K=3 dB(A)
or maintenance, make sure that the battery pack is
101 dB(A)
WA
removed. Failure to heed this warning could result in
2.64 m/s
2 serious personal injury.
K=1.5 m/s
2
2.05 m/s
2
in the braking position before assembly.
K=1.5 m/s
2
bar and chain; these components are sharp and may
contain burrs.
1. Position the chain saw power head on its side with
2. Remove the side cover by turning the bar nut
3. Turn the tensioning screw counterclockwise to loosen
4. Lay the saw chain in a loop on a flat surface and
WARNING:
Before performing any assembling
WARNING:
Adjust the chain-kickback brake paddle
WARNING:
Always wear gloves when handling the
the side cover facing upwards (Fig. B).
counterclockwise.
the chain tension.
straighten any kinks (Fig. C).
EN
7