Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ego Power+ CS2000E
Summary of Contents for Ego Power+ CS2000E
- Page 1 OPERATOR’S MANUAL 56 VOLT LITHIUM-ION CORDLESS CHAINSAW MODEL NUMBER CS2000E WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. MNL_EGO_CS2000E_AV02.01_231101...
- Page 2 3. Chain- 7. Bluetooth Icon ® kickback Brake 8. Headlight Icon Paddle 9. Brake 4. Front Handle Icon 5. LCD Screen 13. Lock-off Button 2. Bucking Spikes 1. Saw Chain 6. Speed Bars 15. Rear Handle 14. Trigger Switch 18. Oil-tank Cap 16.
- Page 3 Pull Push Chain kickback brake paddle in operating position Chain- tensioning Bolt Chain kickback brake paddle in brake position Side Cover Lock Nuts Rotation Direction Chain Cutters Chain Drive Links Chain Drive Links Guide Bar Groove...
- Page 4 Rotation Direction Arrow Sprocket 1.3mm Chain-tensioning Bolt...
- Page 5 Bluetooth ® Headlight Icon Brake Icon Icon Lock-off Button Trigger Switch Speed Bars Gripping Area Fuel-gauge Circle Chain Headlight/ SPEED Speed Bluetooth ® Button Button Low Brightness Headlight Icon High Brightness Headlight Icon LED Headlight Sensors WILL detect sudden motion in this plane.
- Page 6 Notching Undercut Felling Direction 50.8 mm Felling back Dangerous Zone Direction of fall 50.8 mm Safety Safety Notch Retreat Path Retreat Path 45° Hinge Dangerous Zone Log Supported Along the Entire Length Tree Limbing Cut From Top (Overbuck) Avoid Cutting Earth Limb Cut Log Supported One End Log Supported Both Ends...
- Page 7 Sprocket in Guide Bar Tip Lubricating Hole...
-
Page 8: Safety Symbols
This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to Guaranteed sound power Noise assemble and operate. level. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 9: Electrical Safety
A wrench or a key left Keep children and bystanders away while attached to a rotating part of the power tool may result operating a power tool. Distractions can cause you in personal injury. to lose control. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 10: Chainsaw Safety Warnings
A moment of inattention while operating hazardous situation. chainsaws may cause entanglement of your clothing or body with the chain. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 11: Causes And Operator Prevention Of Kickback
◾ Always cut with the unit running at full speed. Fully squeeze the switch trigger and maintain cutting speed. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 12: Low Kickback Saw Chain
If the chain brake is clogged with wood chips, the function of the chain brake may deteriorate. ◾ Do not charge the battery pack in rain or in wet Always keep the device clean. locations. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 13: Guide Bar
22. Side Cover Nuts 23. LED Headlight Weight (without battery pack, saw 24. Chain-tensioning Bolt chain, guide bar, side cover, oil and 3.9 kg 25. Double-end Socket Wrench chain sheath) 26. Chain Sheath 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 14: Operation
It is essential to fill the tank with oil before use. The chain is automatically lubricated with chain oil during operation. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 15: Starting/Stopping The Chainsaw
(Fig. R). 4. Release the lock-off button and continue to squeeze the trigger for continued operation. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... - Page 16 Make the felling back cut at least 50 mm higher than TECHNIQUES FOR BASIC FELLING, LIMBING, AND the horizontal notching cut as Fig. W2 shown. Keep CROSS-CUTTING the felling back cut parallel to the horizontal notching 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E...
-
Page 17: Guide Bar Maintenance
Don’t let the chain contact the ground. After completing ◾ Spread rails. the cut, wait for the saw chain to stop before you move the chainsaw. Always stop the motor before moving from tree to tree. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 18: Chain Maintenance
Clean the chainsaw thoroughly before storing. Store the chainsaw indoors, in a dry place that is locked and/ or inaccessible to children. ◾ Keep away from corrosive agents such as garden chemicals and de-icing salts. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... -
Page 19: Troubleshooting
Debris preventing full movement of Clean debris from the external chain the chain-kickback brake paddle. brake mechanism. Chain brake does not engage. ◾ ◾ Possible chain brake malfunction. Contact EGO Customer Service for repair. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... - Page 20 ◾ ◾ Chain does not engage drive Reinstall the saw chain, following the during normal use. sprocket. section: “ASSEMBLING/REPLACING THE BAR AND CHAIN”. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E...
-
Page 21: Warranty Policy
Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178. Ph Australia; 1300 000 346. Email: support@egopowerplus.com.au Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141. Ph New Zealand; 0508 000 346. Email: support@egopowerplus.co.nz 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E... - Page 22 5 years 2 years STX3800, HTX7500, CSX3000, PPX1000, PSX2500, PTX5100, BHX1001, STX4500, BCX4500, EDX2000, HTX5300-P, HTX5300-PA, LBPX8000, CSX5000 Commercial Backpack Battery: BAX1501 3 years 2 years Commercial Charger: CHX5500E 3 years 2 years 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS2000E...
Need help?
Do you have a question about the CS2000E and is the answer not in the manual?
Questions and answers