Starting The Software; 95/98/Nt - Minolta DIMAGE EX - SOFTWARE Software Instruction Manual

CONNECTING THE CAMERA TO THE PC - CONT'D
The IrDA window on the front of the Dimâge EX should be
positioned within a range of 30˚ and within 30-60cm (11.8-23.6
in.) of the built-in or external infrared port on the PC.
[Side view]
IrDA window on the front of the Dimâge
EX
30 - 60cm
30-60cm
(11.8 - 23.6 in.)
(11.8-23.6in)
[Top view]
15° max
15 ˚
15° max
15 ˚
• Be sure the IrDA transfer units face directly.
• The above figures are standard guide lines. Results may vary depending on the PC.
20
IrDA transfer unit on notebook PCs or IrDA
adapter transfer unit
max
max

STARTING THE SOFTWARE

®
With Windows

95/98/NT

Connect the camera and the PC (p. 15, p 17).
Switch the camera ON, then slide the Mode switch to PC.
Start the PC.
Select Start ➔ Program ➔ Digita Desktop ➔ Digita Desktop.
• The control strip appears when the application is started.
Click on Connect.
• The following window appears.
Click on the connection method to be selected, and click on
OK.
• Select either the serial or Infrared connection.
Continued on Next Page.
21