With The Macintosh - Minolta DIMAGE EX - SOFTWARE Software Instruction Manual

STARTING THE SOFTWARE
• The Camera Panel appears when the camera is connected.
• The Camera Panel does not appear if the connection fails.
Check the following if the Camera Panel is not displayed.
Are the camera and PC serial adapter connected correctly? (see page 15).
1
Is the PC serial adapter firmly plugged in? (see page 15).
2
Have you selected the correct connection method? (see pages 15 - 20).
3
Is the camera switched ON?
4
Is the compact flash card inserted in the camera?
5
Is the camera in the PC connection mode? (see page 16).
6
Check that the comport driver is installed correctly (refer to your windows help file
7
or documentation).
Be sure there are no comport-blocking utilities loaded.
8
After checking the above, switch the camera off, then on again, then go through the
procedure on page 20 again to restart the software.
22

With the Macintosh

Connect the camera to the Macintosh (p. 15-16).
Switch the camera ON, then Slide the Mode switch to PC.
Start the Macintosh.
Open the folder containing Digita Desktop™ (the folder
selected at installation, or a newly created folder).
Double-click on the Digita Desktop™ icon.
• Digita Desktop™ starts, and the Digita Desktop™ window appears.
Double-click on the icon.
Continued on Next Page.
23