Minolta DIMAGE EX - SOFTWARE Software Instruction Manual page 52

SOFTWARE INFORMATION FOR MACINTOSH
Installation of QuickTime 3.0
QuickTime™ 3.0 is necessary to run the Digita Desktop™ software on the
Macintosh.
Install QuickTime 3.0 if it is not already installed on your system.
1. Insert the Dimâge EX CD-ROM into the CD-ROM drive.
2. Double-click on the CD-ROM icon, then double-click on the QuickTime
Installer folder.
3. Double click on the Installer icon in the QuickTime Installer folder.
4. Follow the instructions that appear on the screen.
100
SOFTWARE INFORMATION FOR WINDOWS
DirectX Installation - Windows 98/Windows 95
DirectX is necessary to run Digita Desktop™ on a Windows based operating sys-
tem.
Please install DirectX before installing Digita Desktop™. These instructions
assume the CD-ROM drive is drive D.
1. Insert the Dimâge EX CD-ROM into the CD-ROM drive.
2. Select Start ➔ Run. The Run dialog box will appear.
3. Type D:\DimageEX\Dx6core.exe in the Open text box, then click on OK.
4. Follow the directions that appear on the screen. Dx6core.exe will check for and
automatically install DirectX if necessary.
DirectX Installation - Windows NT
Check the Windows NT start-up screen to determine which Service Pack is installed
on your PC. Service Pack 3: DirectX is already installed.
Service Pack 1 or 2: Contact Microsoft for Service Pack 3 information.
IrDA COM Port - Windows 98/Windows 95
When the camera is connected to
the computer via the IrDA connec-
tion, COM4 should be the Infrared
Serial [COM] Connections Port.
To check the COM port:
1. Select Start ➔ Settings ➔
Control Panel.
2. Click on the Infrared icon, then
click on the Options tag.
3. Check that COM4 appears in the
"Providing application support..."
line.
If COM4 does not appear, refer to
Windows Help or your computer
user's manual for instructions on
how to change the Infrared Serial
Connections Port.
101