Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison LEEB4C
Summary of Contents for Walker Edison LEEB4C
- Page 1 Item: LEEB4C Revised 02/2024-V2...
- Page 2 A Phillips head screwdriver and hammer are required for the assembly of this product.
- Page 4 41 pcs Ø8*30mm Wooden dowel Ø10*20mm Wooden dowel 12 pcs Ø4,0*40mm Screw 22 pcs 04 pcs Ø3,0*12mm Screw Ø15*12mm 08 pcs Cam lock Ø6*31mm Cam bolt 08 pcs Ø3,5*30mm Screw 18 pcs Wooden dowel 04 pcs Ø8*40mm Screw Ø4,0*25mm 12 pcs Handle 02 pcs Phillips...
- Page 5 Insert wood dowel (B) into parts 17. Ø10*20mm Insert wood dowel (A) into parts 15, 19, 20, 24, 26, 28, 33, 34 and 36. Ø8*30mm...
- Page 6 Step 3 1 - Ensure cam bolt is installed straight and not at an angle. 2 - Tighten cam bolt until shoulder on cam bolt is flush. Do not over-tigh- ten. Attach cam bolt (F) into the holes in parts 24 and 26 with Phillips head screwdriver.
- Page 7 Secure parts 17 to parts 24 and 26 with screw (I) Step 4 and Phillips head screwdriver. Ø4,0*25mm...
- Page 8 Step 5 Secure part 28 to part 15 with screw (G) and Phillips head screwdriver. Ø3,5*30mm Step 6 Align the opening in cam lock to the cam bolt and press into opening. Using a screwdriver, rotate the cam lock until it engages with the cam bolt and locks in place (anywhere between 90-180 degrees).
- Page 9 Step 7 Fit part 24 to parts 28 and 15. Insert Cam lock (E) in the hole of the parts 28 and 15 and attach with Phillips head screwdriver. Ø15*12mm...
- Page 10 Step 8 Name and address of the supplier and date of production. Insert part 30 into parts 24, 26 and 28. P.10...
- Page 11 Step 8 Secure part 32 to parts 24 and 26 with screw (C) and Phillips head screwdriver. Ø4,0*40mm P.11...
- Page 12 Step 9 Secure parts 34 to parts 36 with screw (C) and Phillips head screwdriver. Ø4,0*40mm Step 10 Secure parts 33 to parts 36 with screw (C) and Phillips head screwdriver. Ø4,0*40mm P.12...
- Page 13 Step 11 Fit parts 34 and 36 to part 32. Secure parts 33 and 34 to part 32 with screw (C) and Phillips head screwdriver. Ø4,0*40mm P.13...
- Page 14 Step 12 Rotate 90° FRONT Insert wood dowel (A) into the front hole in the wood slider 17. Ø8*30mm P.14...
- Page 15 Step 13 Secure parts 19 and 20 to parts 06 with screw (G) and Phillips head screwdriver. Ø3,5*30mm Step 14 Insert part 30 into grooves to the parts 19 and 20, and secure part 21 with screw (G) and Phillips head screwdriver. Ø3,5*30mm P.15...
- Page 16 Step 15 Attach Handle (J) with screw (D) and Phillips head screwdriver . ø3,0*12m Step 16 Insert wood dowel (H) on the inside of all drawers, with the drawer inside the unit after having passed the wood dowel that is in the drawer slide. The dowel is not flush with the panel, it is a little inside the drawer to help when you need to remove the lock dowel to remove the drawer.
- Page 17 Step 17 34 lbs 17,5 kg 20 lbs 9 kg P.17...
Need help?
Do you have a question about the LEEB4C and is the answer not in the manual?
Questions and answers