Belkin F5D8232-4 User Manual page 52

Using the Web-Based
Advanced User Interface
Changing the Wireless Channel – There are a number of operating
channels from which you can choose—in the United States, there are 11
and in the United Kingdom (and most of Europe), there are 13. In a small
number of other countries, there are other channel requirements. Your N1
Vision is configured to operate on the proper channels for the country in
which you reside. The channel can be changed if needed. If there are other
wireless networks operating in your area, your network should be set to
operate on a channel that is different than the other wireless networks.
Using the Wireless Mode Switch – This switch allows you to set
the N1 Vision's wireless modes. There are several modes.
Note: Some modes may require firmware updates to be enabled.
1. 802.11b+g+n – Setting the N1 Vision to this mode will allow 802.11b-
, 802.11g-, and 802.11n-compliant devices to join the network.
2. Off – This mode will turn OFF the N1 Vision's access point, so
no wireless devices can join the network. Turning off the wireless
function of your N1 Vision is a great way to secure your network
when you are away from home for a long period of time, or don't
want to use the wireless feature of the N1 Vision at a certain time.
50