Belkin F5D8232-4 User Manual page 101

Troubleshooting
I am having difficulty setting up Wired Equivalent
Privacy (WEP) security on a Belkin client card.
The client card must use the same key as the N1 Vision. For instance, if your
N1 Vision uses the key 00112233445566778899AABBCC, then the client
card must be set to the exact same key.
1. Double-click the Signal Indicator icon to bring up the "Wireless
Network" screen.
2. The "Advanced" button will allow you to view and configure more
options of the card.
3. Once the "Advanced" button is clicked, the Belkin Wireless LAN Utility
will appear. This Utility will allow you to manage all the advanced
features of the Belkin Wireless Card.
4. Under the "Wireless Network Properties" tab, select a network name
from the "Available Networks" list and click the "Properties" button.
5. Under "Data Encryption", select "WEP".
6. Ensure the check box "The key is provided for me automatically" at the
bottom is unchecked. If you are using this computer to connect to a
corporate network, please consult your network administrator if this box
needs to be checked.
7. Type your WEP key in the "Network key" box.
Important: A WEP key is a mixture of numbers and letters from A-F and
0-9. For 128-bit WEP, you need to enter 26 keys. This network key needs
to match the key you assign to your N1 Vision.
For example: C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key
8. Click "OK", and then "Apply" to save the settings.
If you are NOT using a Belkin wireless client card, please consult the
manufacturer's user manual for that wireless client card.
99
1
2
3
4
5
6
7
8
9
10