Belkin PM01122EA User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Wireless Router
  5. PM01122EA
  6. User manual
Belkin PM01122EA User Manual

Belkin PM01122EA User Manual

N wireless router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
N Wireless
routEr
user Manual
PM01122ea F5D8236-4
English
Français
DEutsch
nEDErl anDs
Español
italiano

Advertisement

Table of Contents
loading

Related Manuals for Belkin PM01122EA

Summary of Contents for Belkin PM01122EA

  • Page 1 N Wireless routEr user Manual PM01122ea F5D8236-4 English Français DEutsch nEDErl anDs Español italiano...

  • Page 2: Table Of Contents

    Table of CoNTeNTs sections table of contents 1 Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 Advantages of a Wireless Network Placement of your N Wireless Router 2 Product overview �...

  • Page 3: Advantages Of A Wireless Network

    Thank you for purchasing the Belkin N Wireless Router (the Router). Following are two short sections—the first discusses the benefits of home networking, and the other outlines best practices that maximize your wireless home network range and performance.

  • Page 4: N Wireless Router

    Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become the N Wireless Router superhighway in this example.

  • Page 5: N Wireless Router

    Place your Router, the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...

  • Page 6: Through

    • For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

  • Page 7: Product Features

    In minutes you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Belkin N Wireless Router an ideal solution for your home or small office network.

  • Page 8: N Wireless Router

    IP addresses to each computer automatically so there is no need for a complicated networking setup. setup assistant The Setup Assistant, second generation of Belkin’s renowned Easy Install Wizard, takes the guesswork out of setting up your Router. This automatic software determines your network settings for you and sets up the Router for connection to your Internet Service Provider (ISP).

  • Page 9: Knowing Your Router

    KNoWINg yoUR RoUTeR sections table of contents Package Contents • Belkin N Wireless Router • Quick Installation Guide • LED Troubleshooting Guide • Security Setup Guide • EZI Setup Assistant CD • Power Supply • RJ45 Ethernet Networking Cable (with User Manual on CD-ROM) system Requirements •...

  • Page 10: N Wireless Router

    KNoWINg yoUR RoUTeR sections table of contents a� Wireless security Wireless security is off Solid Blue Wireless security is on b� Wi-fi Protected setup (WPs) button This button is used for the Wi-Fi Protected Setup feature. Please refer to the “Changing the Wireless Security Settings” section. C�...

  • Page 11: N Wireless Router

    KNoWINg yoUR RoUTeR sections table of contents f� Modem status This icon lights in blue to indicate that your modem is connected properly to the Router. It turns amber when problem is detected. Router is NOT connected to modem Router is connected to modem Solid Blue and functioning properly Blinking Amber...

  • Page 12: N Wireless Router

    KNoWINg yoUR RoUTeR sections table of contents H� Connections to Wired Computers Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4.

  • Page 13: Connecting And Configuring Your Router

    N Wireless Router setup assistant Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your computer be connected directly to your Router and that the Internet connection is active and working at the time of installation.

  • Page 14: N Wireless Router

    Unplug your existing modem’s power supply. Find the cable connecting your modem and computer. Unplug it from the modem and plug it into the gray port on the Belkin Router. If you are replacing an existing router, find the cable connecting the computer and old router.

  • Page 15: N Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents step 2: set Up the Router – Run the setup assistant software a� Shut down any programs that are running on your computer at this time. Turn off any firewall or Internet- connection-sharing software on your computer.

  • Page 16: N Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents Confirmation screen Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click “Next” to continue. N Wireless Router Progress screen Setup Assistant will show you a progress screen each time a step in the setup has been completed.

  • Page 17: N Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents 1�1 Checking settings The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet. N Wireless Router 1�2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection.

  • Page 18: N Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents 1�3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect.

  • Page 19: N Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents 1�5 Configuring the Router The Setup Assistant will now configure your Router by sending data to the Router and restarting it. Wait for the on-screen instructions. Note: Do not disconnect any cable or power off the Router while the Router is rebooting.

  • Page 20: N Wireless Router

    Congratulations You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.

  • Page 21: G Wireless Router

    CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR sections table of contents 1�7 optional: assistance Connecting other Computers This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions. g Wireless Router Congratulations Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working.

  • Page 22: Alternate Setup Method

    alTeRNaTe seTUP MeTHod sections table of contents step 1: Hardware Connections – follow the Quick Installation guide See the QIG or Step 1: Hardware Connections from the previous section. step 2: set your Computer’s Network settings to Work with a dHCP server See the section in this User Manual called “Manually Configuring Network Settings”...

  • Page 23: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents logging out of the Router One computer at a time can log into the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out.

  • Page 24: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents 1� Quick-Navigation links You can go directly to any of the Router’s advanced UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find. Clicking on the header of each tab will show you a short description of the tab’s function.

  • Page 25: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents 9� Internet settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the links or by clicking on the “Internet/WAN” quick- navigation link on the left side of the screen.
  • Page 26 alTeRNaTe seTUP MeTHod sections table of contents setting your Connection Type From the “Connection Type” page, you can select the type of connection you use. Select the type of connection you use by clicking the button (1) next to your connection type and then clicking “Next” (2). N Wireless Router setting your Internet service Provider (IsP) Connection Type to dynamic IP...
  • Page 27 alTeRNaTe seTUP MeTHod sections table of contents setting your Internet service Provider (IsP) Connection Type to static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address.

  • Page 28: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents 1� User Name This space is provided to type in your user name that was assigned by your ISP. 2� Password Type in your password and re-type it into the “Retype Password” box to confirm it.

  • Page 29: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents setting your Internet service Provider (IsP) Connection Type to Point-to-Point Tunneling Protocol (PPTP) [European Countries Only] Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries. This sets up a direct connection to the ISP’s system.

  • Page 30: N Wireless Router

    alTeRNaTe seTUP MeTHod sections table of contents 6� disconnect after X…� The “Disconnect” feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering “5” into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity.

  • Page 31: N Wireless Router

    Internet service. When you install the Router, its own MAC address will be “seen” by the ISP and may cause the connection not to work. Belkin has provided the ability to clone (copy) the MAC address of the computer into the Router.
  • Page 32 alTeRNaTe seTUP MeTHod sections table of contents entering a specific MaC address In certain circumstances you may need a specific WAN MAC address. You can manually enter one in the “MAC Address” page. Type in a MAC address in the spaces provided (2) and click “Apply Changes” (3) to save the changes.

  • Page 33: Using The Web-Based Advanced User Interface

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “www”) then press the “Enter”...

  • Page 34: Subnet

    2� subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to do so.

  • Page 35: Viewing The Dhcp Client List

    IP address to change. 6� local domain Name The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

  • Page 36: Configuring The Wireless Network Settings

    To identify your wireless network, a name called the SSID is used. The SSID is your network name. The default network name of the Router is “Belkin N Wireless” followed by six digits that are unique to your Router. Your network name will look something like “Belkin_N_ Wireless_123456”.
  • Page 37 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Changing the Wireless Channel There are a number of operating channels from which you can choose— in the United States, there are 11 and in the United Kingdom (and most of Europe), there are 13.
  • Page 38 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents N Wireless Router Using the bandwidth switch This switch allows you to set the Router’s wireless bandwidth modes. There are several modes available: 1) 20MHz only Setting the Router to this mode allows only 20MHz operation. This mode is compatible with N, draft 802.11n-, 802.11g-, and 802.11b-compliant devices, but will limit N, draft 802.11n-compliant devices’...
  • Page 39 802.11g or 802.11b traffic in the operating environment. Use protected mode if your network consists of a mix of Belkin N Wireless Cards and 802.11g or 802.11b cards on your network. If you are in an environment that includes little to no 802.11g or 802.11b wireless network traffic, you will achieve the best N wireless...
  • Page 40 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Using Wi-fi Protected setup WPS uses WPA/WPA2 (described on page 39) for encryption. It does not provide additional security, but rather, standardizes the method for securing your wireless network. You may use either the Push Button Configuration (PBC) method or PIN method to allow a device access to your wireless network.
  • Page 41 IMPoRTaNT: You also need to ensure that all your wireless client cards/adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have driver updates available for download from the Belkin support site:...
  • Page 42 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents setting WPa/WPa2-Personal (PsK) Both WPA and WPA2 are available in Personal (PSK) mode and Enterprise (RADIUS) mode. Typically, Personal (PSK) is the mode that will be used in a home environment, while Enterprise (RADIUS) is implemented in a business environment where an external radius server distributes the network key to the clients automatically.

  • Page 43: Setting Wpa Security

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents setting WPa security Note: To use WPA security, your wireless network cards must be equipped with software that supports WPA. At the time this User Manual was published, a security patch from Microsoft is available for free download.

  • Page 44: Setting Wep Encryption

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents setting WeP encryption Note to Mac users: The “Passphrase” option will not operate with Apple AirPort . To configure encryption for your Mac computer, set the ® ® encryption using the manual method described in the next section. 1�...

  • Page 45: Using The Access Point Mode

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from A–F and 0–9. 64-bit keys are 10 digits long and can be divided into five two-digit numbers.

  • Page 46: Setting Mac Address Control

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents setting MaC address Control The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network. Note: This list applies only to wireless computers. This list can be configured so any computer attempting to access the wireless network that is not specified in the filter list will be denied access.

  • Page 47: Configuring The Firewall

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents setting up a deny access list The “Deny Access” list lets you specify computers that you DO NOT want to access the network. Any computer in the list will not be allowed access to the wireless network.
  • Page 48 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents The firewall also masks common ports that are frequently used to attack networks. These ports appear to be “stealth” meaning that for all intents and purposes, they do not exist to a would-be hacker. You can turn the firewall function off if needed;...
  • Page 49 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Choosing an application Select your application from the drop-down list. Click “Add”. The settings will be transferred to the next available space in the screen. Click “Apply Changes” to save the setting for that application. To remove an application, select the number of the row that you want to remove then click “Clear”.
  • Page 50 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents To restrict Internet access to a single computer for example, enter the IP address of the computer you wish to restrict access to in the IP fields (1). Next, enter “80” in both the port fields (2). Select “Both” (3). Select “Block”...

  • Page 51: Using Dynamic Dns

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Using dynamic dNs The Dynamic DNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network computers to be more easily accessed from various locations on the Internet.

  • Page 52: Utilities

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there.

  • Page 53: Restarting The Router

    UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings. Restarting the Router to Restore Normal operation 1�...
  • Page 54 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 3� The following message will appear. Restarting the Router can take up to 60 seconds. It is important not to turn off the power to the Router during the restart. 4�...
  • Page 55 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 2� The following message will appear. Click “OK”. 3� The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart.
  • Page 56 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
  • Page 57 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 3� When the save is complete, you will see the window below. Click “Close”. The configuration is now saved. N Wireless Router Restoring a Previous Configuration This option will allow you to restore a previously saved configuration. 1�...
  • Page 58 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 2� You will be asked if you want to continue. Click “OK”. 3� A reminder window will appear. It will take up to 60 seconds for the configuration restoration to complete. Click “OK”. N Wireless Router 4�...

  • Page 59: Updating The Firmware

    Updating the firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version.
  • Page 60 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 2� A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later.
  • Page 61 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Updating the Router’s firmware 1� In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file. N Wireless Router 2�...
  • Page 62 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents 3� The “Update Firmware” box will now display the location and name of the firmware file you just selected. Click “Update”. N Wireless Router 4� You will be asked if you are sure you want to continue. Click “OK”. 5�...
  • Page 63 UsINg THe Web-based adVaNCed UseR INTeRfaCe sections table of contents Changing system settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router. setting or Changing the administrator Password The Router ships with NO password entered.
  • Page 64 N Wireless Router enabling Remote Management Before you enable this advanced feature of your Belkin Router, MaKe sURe yoU HaVe seT THe adMINIsTRaToR PassWoRd. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 65 UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly.

  • Page 66: Manually Configuring Network Settings

    MaNUally CoNfIgURINg NeTWoRK seTTINgs sections table of contents Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. Manually Configuring Network settings in Mac os up to 9�x 1�...
  • Page 67 MaNUally CoNfIgURINg NeTWoRK seTTINgs sections table of contents Manually Configuring Network settings in Mac os X 1� Click on the “System Preferences” icon. 2� Select “Network” (1) from the “System Preferences” menu. N Wireless Router 3� Select “Built-in Ethernet” (2) next to “Show” in the Network menu. 4�...
  • Page 68 MaNUally CoNfIgURINg NeTWoRK seTTINgs sections table of contents 5� If “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.
  • Page 69 MaNUally CoNfIgURINg NeTWoRK seTTINgs sections table of contents Manually Configuring Network settings in Windows 2000, NT, or XP 1� Click “Start”, “Settings”, then “Control Panel”. 2� Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP). 3�...
  • Page 70 MaNUally CoNfIgURINg NeTWoRK seTTINgs sections table of contents Manually Configuring Network settings in Windows 98 or Me 1� Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2� Select “TCP/IP -> settings” for your installed network adapter. You will see the following window.

  • Page 71: Recommended Web Browser Settings

    ReCoMMeNded Web bRoWseR seTTINgs sections table of contents In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section. Microsoft Internet explorer 4�0 or Higher ®...
  • Page 72 ReCoMMeNded Web bRoWseR seTTINgs sections table of contents 3� Under the “Internet Options” screen, click on “Connections” and select “LAN Settings…”. 4� Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”.

  • Page 73: Troubleshooting

    TRoUblesHooTINg sections table of contents setup assistant Cd does not automatically start� If the CD-ROM does not start the Setup Assistant automatically, it could be that the computer is running other applications that are interfering with the CD drive. 1� If the Setup Assistant Welcome screen does not appear within 15-20 seconds, open up your CD-ROM drive by double-clicking on the “My Computer”...
  • Page 74 This will cause the Router to reattempt communication with the modem. If the “modem” LED on the Router is not lit after completing these steps, please contact Belkin Technical Support. 4� Try shutting down and restarting your computer.
  • Page 75 ISP. To search our knowledge base for ISP-specific issues, go to: http:// web.belkin.com/support and type in “ISP”. If you are still unable to access the Internet after disabling any firewall software, please contact Belkin Technical Support. N Wireless Router • The Setup Assistant completed, but my web browser doesn’t work�...
  • Page 76 If you are unable to connect to the Internet from a wireless computer, please check the following items: 1� Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows: • The “router” LED should be on. • The “modem” light should be on, and not blinking.
  • Page 77 (as opposed to wirelessly), ensure that “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. N Wireless Router • My wireless network performance is inconsistent.
  • Page 78 N Wireless Router I am having difficulty setting up Wired equivalent Privacy (WeP) security on my belkin Router� 1� Log into your Router. Open your web browser and type in the IP address of the Router.
  • Page 79 The “Advanced” button will allow you to view and configure more options of your card. 3� Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.
  • Page 80 C3 03 0f af 4b b2 C3 d4 4b C3 d4 e7 e4 = 128-bit key 8� Click “OK”, and then “Apply” to save the settings. If you are not using a Belkin wireless client card, please consult the manufacturer’s user manual for that wireless client card. N Wireless Router...
  • Page 81 N Wireless Router I am having difficulty setting up Wireless Protected access (WPa) security on a belkin wireless client card for a home network� Clients must use the same key that the Router uses. For instance, if the key is “Smith Family Network Key” in the Router, the clients must also use that same key.
  • Page 82 I am NoT using a belkin client card for a home network and I am having difficulty setting up Wireless Protected access (WPa) security� If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless...
  • Page 83 TRoUblesHooTINg sections table of contents 3� Select the network to which you are trying to connect and click on “Properties”. You will see the following screen. N Wireless Router 4� For a home or small business user, select “WPA-PSK” under “Network Authentication”.
  • Page 84 TRoUblesHooTINg sections table of contents belkin Wireless Comparison Chart Wireless g Plus MIMo Technology (802�11g) (802�11g with MIMo MRC) speed/data Up to 54Mbps* Up to 54Mbps* Rate* frequency Common Common household household devices such as devices such as cordless phones...
  • Page 85 Tech support* *National call rates may apply You can find additional support information on our website www.belkin. com through the tech-support area. If you want to contact technical support by phone, please call the number you need from this list*.
  • Page 86 CoNfoRMITy WITH fCC RUles foR eleCTRoMagNeTIC CoMPaTIbIlITy We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the device, f5d8236-4v1 complies with Part 15 of the FCC Rules. Operation is subject to...
  • Page 87 EN 301 489 General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive (89/336/ EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
  • Page 88 EN 301 489 General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive (89/336/ EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
  • Page 89 N Wireless Router What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
  • Page 90 Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
  • Page 91 Con la presente [Belkin Ltd] dichiara che questo [F5D8236-4] è conforme ai requisiti essenziali [Italian] ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar šo [Belkin Ltd Belkin Ltd ] deklar , ka [F5D8236-4 / iek rtas tips] atbilst Direkt vas 1999/5/EK Latviski [Latvian] b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
  • Page 92 Italy © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, NT, and Microsoft are either...

This manual is also suitable for:

F5d8236-4

Table of Contents