Settings - EcoFlow DELTA 2 Max User Manual

Settings

1. Rename
The default name of the product is its serial number but you can personalize it to your preferred name.
2. Device sharing
Share this device with other accounts and co-control the device .
This feature is only available when the device is connected to the Internet.
Add Share
3. Beep
Turn on/off button sound effect.
4. AC charging speed:
On DELTA 2 Max product there is an "AC charging speed switch", switch it to the left to (re)charge DELTA 2 Max at
maximum charging speed and switch it to the right for slower speed or customized charging speed. You can also
set the AC charging range in the EcoFlow App.
5. Car charging current
Set the input current for car charging.
The default and maximum values are 8A.
6. Smart Generator auto on/off
Connect Smart Generator to DELTA 2 Max to turn on the Smart Generator and monitor the battery level of DELTA
2 Max. You can define the battery level to start the Smart Generator engine, and when the total battery level is
detected to be lower than the preset engine start value, the engine will start to charge DELTA 2 Max. Similarly, if
the battery level is monitored to reach the preset value for switching off the engine, the engine will be switched off
and charging will stop.
8