Basic Safety Information; Safety Information - Sofar solar HYD 5KTL-3PH User Manual

2

Basic safety information

▶
If you have any questions or problems after reading the following
information, please contact SOFAR
This chapter details the safety information pertaining to the installation and
operation of the device.
2.1

Safety information

Read and understand the instructions within this manual and familiarise
yourself with the relevant safety symbols in this chapter before beginning
with the installation of the device and eliminating any faults.
Before connecting to the power grid, you must obtain official authorisation
from the local power grid operator in accordance with the corresponding
national and state requirements. Furthermore, operation may only be
carried out by qualified electricians.
Please contact the nearest authorised service centre if any maintenance or
repairs are required. Please contact your dealer to obtain information about
your nearest authorised service centre. Do NOT carry out repairs on the
device yourself; this may lead to injury or property damage.
Before installing the device or carrying out maintenance on it, you must
open the DC switch in order to interrupt the DC voltage of the PV generator.
You can also switch off the DC voltage by opening the DC switch in the
generation junction box. Not doing this may result in serious injury.
4
BASIC SAFETY INFORMATION
HYD 5...20KTL-3PH