Advertisement

Quick Links

HYD 3-6K-EP
滚滚长江东逝水

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYD 3-6K-EP and is the answer not in the manual?

Questions and answers

Summary of Contents for Sofar solar HYD 3-6K-EP

  • Page 1 HYD 3-6K-EP 滚滚长江东逝水...
  • Page 2: Table Of Contents

    User manual HYD 3-6K-EP Contents Preface ......................II 1. Basic safety information ............- 1 - 1.1. Safety instructions ............- 1 - 1.2. Symbols and signs ............- 4 - 2. Product characteristics ............- 6 - 2.1. Product informations ..........- 6 - 2.2.
  • Page 3 User manual HYD 3-6K-EP 6.1. Double Check ...............- 43 - 6.2. Starting up and shutting down the inverter- 43 - 6.3. Menu .................. - 51 - 7. Troubleshooting ...............- 68 - 8. Technical Data ................- 78 - 9. Quality Assurance ..............- 87 -...
  • Page 4 SOFARSOLAR reserves the right of final interpretation. This manual is subject to change according to user’s or customer’s feedback. Please check our website at http://www.sofarsolar.com for latest version. Document Updates V3.0 2024-2-29 Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 5: Preface

    You must understand these emphasized information to avoid the personal injury and property loss. Please read the following symbols used in this manual carefully. Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 6 Caution Attention indicates potential risks which, if not avoided, may lead to equipment fault or property damage. Attention Note provides tips that are valuable for the optimal operation of the product. Note Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 7: Basic Safety Information

    / or has demonstrated skills and knowledge in construction and in operation of this unit, can install this inverter. Shenzhen SOFARSOLAR Co., Ltd. does not take any responsibility for the - 1 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 8 Transport of the equipment, especially by road, must be carried out with by suitable ways and means for protecting the components (in particular, the electronic components) from violent shocks, humidity, vibration, etc. Labels on the equipment - 2 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 9 OFF the DC switch. After turning OFF the AC circuit breaker and DC switch, wait for 5 minutes at least before carrying out Danger any maintenance or repair work. - 3 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 10: Symbols And Signs

    Signs on the inverter There are some symbols which are related to security on the inverter. Please read and understand the content of the symbols, - 4 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 11 This side up, HYD 3K~6K-EP inverter must always be transported, handled and stored in such a way that the arrows always point upwards. RCM (Regulatory Compliance Mark) The product complies with the requirements of the applicable Australian standards. - 5 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 12: Product Characteristics

    In the period of continuous power supply and emergency power supply demand in mountainous areas or base stations without power grid. Fig. 2-1 HYD 3K~6K-EP inverter system diagram - 6 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 13: Size Description

    Max. battery charge and discharge efficiency 94.6%. 1 strings of battery input with maximum 100A charge and discharge current. Wide battery voltage range(90-580V). AC Multi-parallel function, more flexible system solution. Smart monitoring, RS485/WiFi/Bluetooth/GPRS(Optional). - 7 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 14: Electrical Block Diagram

    User manual HYD 3-6K-EP 2.4. Electrical block diagram Fig. 2-3 Electrical block diagram - 8 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 15: Installation

    After unpacking the inverter, check whether deliverables are intact and complete. If any damage is found or any component is missing, contact the dealer. Table3-1 Components and mechanical parts that should be delivered Picture Description Quantity - 9 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 16 BAT- input terminal 1pcs BAT+ input terminal 1pcs M6 Hexagon screws 3pcs M8*80 Expansion bolts used to secure the 4pcs wall-mount bracket to the wall AC Grid connector 1pcs - 10 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 17: Product Overview

    Quality Certificate 1pcs 3.2. Product Overview HYD 3K~6K-EP inverter is 100% strictly inspected before package and delivery. It is forbidden to put the HYD 3K~6K-EP inverter upside down during delivery. - 11 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 18: Tools

    Table 3-3 Tools required for installation and electrical connections. Tool Model Function Hammer drill Used to drill holes on the Recommend wall. drill dia. 10mm Screwdriver Wiring Cross Remove install screwdriver terminal screws - 12 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 19: Installation Environment

    -25℃ ~ 60℃. c. Relative humidity: 0 ~ 100% (non-condensed). d. HYD 3K~6K-EP inverter shall be installed in a well-ventilated place. - 13 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 20: Determining The Installation Position

    Determine an appropriate position for installing the HYD 3K~6K-EP inverter. Comply with the following requirements when determining the installation position. Fig. 3-3 Installation Position of HYD 3K~6K-EP inverter ① ② ③ ⑤ ⑥ ④ - 14 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 21: Moving The Hyd 3K~6K-Ep

    Place the inverter horizontally. When placing the inverter on the floor, put foam or paper Attention under the inverter to protect its shell. - 15 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 22: Installing Hyd 3K~6K-Ep

    Step 5 You can secure the inverter to the rear panel and protect if from stealing by installing an anti-theft lock (this action is optional), as shown in Figure 3-5⑤. Fig. 3-5 Installing HYD 3K~6K-EP ② ① ③ - 16 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 23: Electrical Connections

    ≤ 580V. Note The connected PV modules must have an IEC 61730 Class A ratin Table 4-1 Relevant current parameters of each model - 17 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 24: Wire Instructions

    -:Connect the negative ~ cable 20mm electrode of lithium battery +:Connect the positive Industry Conductor electrode of photovoltaic common cross-sectional cell outdoor area:4mm ~ photovoltaic -:Connect the negative cable electrode of photovoltaic - 18 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 25: Connecting Pgnd Cables

    Note 2: The cavity formed after crimping the conductor crimp strip shall wrap the - 19 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 26: Pv Connection

    Ensure that the cables are crimped until they cannot be pulled out by force less than 400 N, as shown in Fig.4-2 ②③ - 20 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 27 DC SWITCH is OFF. Danger Fig.4-2 Connect PV 1: Positive metal contact 3: Positive connector ② 2: Negative metal contact 4: Negative connector ① ③ ④ ⑤ ⑥ - 21 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 28: Battery Connection

    Step 5 Align the terminal housing with the battery port on the inverter and tighten it at a torque of 2 N·m with a wrench to prevent electric shock caused by manual removal, as shown in Fig. 4-3⑤⑥. - 22 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 29: Load Connection

    Step 3 Connect load output cable as per the following requirements according to the Fig.4-4 ③ Connect the yellow-green wire to the hole labeled "PE", fasten the wire using an Cross screwdriver; - 23 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 30 Fig.4-4⑧, make sure the grid is disconnected before removing the load connector . Fig.4-4 Grid connection A:15~25mm B:6~8mm ② ① - 24 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 31: Grid Connection

    4.6. Grid connection SOFARSOLAR has already integrated RCMU (residual current monitoring unit) inside inverter, If an external RCD is required, a type-A RCD with rated residual current of 100mA or higher is - 25 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 32 Need to dismantle the end connection, to use the tool, as shown in ⑩⑪. Fig.4-5 Load connection A:30~50mm B:3~5mm ② ③ ① - 26 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 33 User manual HYD 3-6K-EP ④ ⑤ ⑥ ⑨ ⑦ ⑧ ⑩ ⑪ - 27 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 34: External Communication Interface

    The USB power supply is USB data + 5V/1A; Cannot be used for USB data - external device charging VBUS power + Refer to the figure shown below. Fig 4-7 Fig 4-8 - 28 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 35 SOLARMAN Smart (for end customers): SOLARMAN Business (for installers): 4.7.2 COM-Multifunction communication interface Table 4-5 Interface description Definition Function Note CANH CAN high data Communication with lithium battery BMS, the CANL CAN low data - 29 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 36 Connect current sensor of power grid The current sensor outputs a positive electrode RS485 differential RS485-B signal + Meter communication RS485 differential RS485-A signal – Fig.4-9 COM interface ① ② ③ - 30 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 37 TX+ and TX- of the RS485→ USB adapter, and connect the USB port of the adapter to the computer. (NOTE:The length of the RS485 communication cable should be less than 1000 m) Fig 4-10 - 31 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 38 2 s. The inverter will continue to respond while the mode remains asserted. Table 4-6 Function description of the DRMs terminal Pin NO. Function DRM1/5 DRM2/6 - 32 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 39 Relay contact 4 input K4 - Relay 4 output Relays common node Table 4-8 The inverter is preconfigured to the following RRCR power levels, close is 1, open is 0 Active Cos(φ) Power - 33 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 40 The connection mode is shown in fig.4-14 . The 1/2 and 3/4 on the ② electricity meter are connected to voltage signals L and N respectively. And the current needs to be connected through the - 34 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 41 Generation and Export Limit Control functions for the inverter are available but require the use of an external measurement device to obtain grid information. There are 2 ways to obtain grid information: Plan A: CT (default) - 35 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 42 Bluetooth APP for setting, enabling/disabling Settings, and setting the Reflux Power limit. Refer to <6.3.2 Advanced setting 2. Anti Reflux> in this manual for specific operation methods. To obtain grid information via Plan B: - 36 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 43 When Hard anti reflux control is enabled, a loss of communication with the meter will cause the inverter to enter into a fault protection state. - 37 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 44 User manual HYD 3-6K-EP Fig. 4-15 Electrical connections (Plan A: CT) default - 38 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 45 User manual HYD 3-6K-EP Fig. 4-16 Electrical connections (Plan B:Meter +CT ) optional - 39 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 46 LOAD current diverted to each machine is nearly equal. 3. When the total power of AC Load is greater than 110% of the - 40 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 47 AC Grid. 4. When inverters in parallel, All AC gird should be Shared a total air switch; All AC LOAD should be Shared another total air switch. Fig.4-18 parallel system - 41 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 48: Buttons And Indicator Lights

    Press “OK” to select the current menu option or switch to  the next digit. 5.2. Indicator lights and status Alarm On Grid Off-Grid Status Green light Green light light On-grid Standby Flashing (On-Grid) Off-Grid Standby Flashing (Off-Grid) - 42 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 49: Operation

    IMPORTANT: PLEASE FOLLOW THE FOLLOWING PROCEDURE to switch ON HYD-ES inverter 1.Turn ON PV switch. 2. Switch ON the battery. 3. Turn ON AC circuit breaker between the HYD-ES inverter GRID port & GRID. - 43 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 50 Mobile APP to import online : After the professional operator connects the machine to Bluetooth through the mobile APP, select the corresponding name of safety regulation in the APP guide - 44 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 51 EU General Europe CEI-021Ex. EU General-MV General Italy CEI-021Ar. EU General-HV CEI-021In.-HV Cyprus CEI-016-HV CY-LV-RES Cyprus CEI-016-MV CY-LN/MV-COM Australia-A CY-LV/MV-UT Australia Australia-B India Australia-C India-MV India ESP-RD1699 India-HV Spain RD1699-HV India-CEA - 45 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 52 Czech EG.D Czech PPDS China-B 2023 SIST EN China Taiwan Slovenia 50549-1 TrinaHome Ukraine Ukraine China HongKong Norway China Norway SKYWORTH Norway-LV CSISolar Mexico Mexico-LV Wide-Range-60 CHINT 60Hz China-MV Ireland EN50549-1 - 46 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 53 Japan-50Hz Romania Romania Japan Japan-60Hz Tunisia Tunisia Switzerlan Type-A Finland Finland Type-B For Australian Market: For compliance with AS/NZS 4777.2:2020 please select from 002-000 Australia A (Australia Region A)  - 47 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 54 55Hz (F>) limit value Trip delay time Maximum disconnecti 0.2s 0.2s 0.2s 0.2s on time Default volt-watt settings for different regions are shown in the following table: Region Default value - 48 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 55 Shenzhen SOFARSOLAR Co., Ltd. is not responsible for any Caution consequences arising out of incorrect country code selection. *4. Set battery parameters (Take the default input channel configuration as an example). Start with battery 1 and work your - 49 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 56 (WiFi/GPRS/Ethernet). End customers cannot modify by themselves. Power quality settings can be set/view/changed by logging  onto solarmanpv.com. Access to solarmanpv.com is restricted to authorised personnel  - 50 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 57: Menu

    Battery Information (1) Batt (V).......****.*V Batt Chrs Curr....**.**A Batt DisChrs Down Curr..**.**A Batt Power....**.*KW ↓ Batt1 Temp......*℃ Batt1 SOC......**% Batt1 Cycles......*T In the main interface, press “UP” button to enter PV parameters - 51 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 58 3.Safety Param. 4.Energy Storage Mode 5.Auto Test (Only for Italy) 6.EPS Mode 7.Communication Addr. 1. Language Settings Used to set the menu display language. 1.Language 1.中文 Settings 2.English 3.Italiano ..- 52 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 59 If the battery is full (or already generation < LOAD Charge Power), excess consumption, it will discharge the - 53 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 60 Outside the effective date, inverter is working in Auto Mode. You can set multiple Time-of-use rules to meet your more complex requirement. Right now we support 4 rules maximum (rule 0/1/2/3). 2.Time-of-use Set Time-of-use Mode - 54 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 61 Start DisCharge 16 h DisCharge 02500 Power Passive Mode For more detailed information, please ask representative of SOFAR to get a copy of passive mode communication protocol. Peak shaving mode - 55 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 62 ↓ Testing 81>S1... Wait ↓ Test 81>S1 OK! Wait ↓ Testing 81>S2… Wait ↓ Test 81>S2 OK! Wait ↓ Testing 81<S1... Wait ↓ Test 81<S1 OK! Wait ↓ Testing 81<S2... - 56 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 63 81>.S2 threshold 51.5Hz 100ms Press “Down” ↓ 81>.S2 49.9Hz 107ms Press “Down” ↓ 81<.S1 threshold 49.5Hz 100ms Press “Down” ↓ 81<.S1 50.0Hz 105ms Press “Down” ↓ 81<.S2 threshold 47.5Hz 100ms - 57 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 64 LOAD If PV generation is normal,but consumption (ΔP > 100W), inverter LOAD consumption=0, the surplus will discharge battery. power will be stored in the battery. 7. Communication Addr 7.Communication 1.Communication - 58 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 65 11.Set PCC Power Offset 1. Battery Parameter Battery 1.Battery Parameter1 Parameter Battery Parameter2 A. Inner BMS 1.Battery 1.Battery Type Parameter 2.Battery Capacity 3.Nominol Voltage 4.Battery Cell Type 5.Max Charge (A) 6.Max Discharge (A) - 59 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 66 Reflux Power set is desired max export power to grid.Refer to 4. 7. 2 for connection of the system when using Feed-in Limit function. 2.Feed-in Limit Enable 1.Feed-in Limitl Disable - 60 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 67 Clean up the historical events recorded in the inverter. 2..Clear Events Clear Events? Parallel setting Please refer to <4.7.3 Link Port 0&1-Cascade communication interface> for the connection method of the parallel system. - 61 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 68 Control Disable 2. Force Active 10.Set PCC Meter The user can enable “Set PCC Meter” to enable the meter to be switched on and off. 10. Set PCC Meter Enable - 62 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 69 6.3.3 Energy Statistic 3.Energy Today Statistic PV ......***KWH Load ......***KWH Export ......***KWH Import.......***KWH Charge.......***KWH Discharge....***KWH Down Month ↓ PV ......***KWH Load ......***KWH Export ......***KWH Import.......***KWH Charge.......***KWH Discharge....***KWH Down Year ↓ PV ......***KWH - 63 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 70 DSP1 Software Version DSP2 Software Version Down Inverter Info (2) ↓ Hardware Version Power Level Country Down Inverter Info (3) ↓ PV Input Mode Energy Storage Mode RS485 Address EPS Mode - 64 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 71 Low(V)Protection 3.Safety Safety Param.(1) Param. OVP 1 OVP 2 UVP 1 UVP 2 Down Safety Param. (2) ↓ OFP 1 OFP 2 UFP 1 UFP 2 Down Safety Param. (3) - 65 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 72 USB flash drive. Step 4 Insert the USB Disk drive into the USB/Wifi interface. Step 5 Then turn on DC switch. Step 6 OK Input 0715 6.Software Input - 66 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 73 LCD screen extinguish, then restore the WiFi connection and then turn on the DC breaker and AC breaker again, the inverter will enters the running state. User can check the current software version System Information>>InverterInfo>>Input 0715>> SoftVersion. - 67 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 74: Troubleshooting

    If an Earth Fault Alarm occurs, the fault will be displayed on the LCD screen, the red light will be on, and the fault can be found in the history of the fault. For the machine installed with - 68 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 75 The grid voltage/frequency is NOT ID004 GridUFP frequency is too within acceptable range and AC wiring is correct, alarm occurs repeatedly, contact technical support change grid over-voltage, under-voltage, over-frequency, under-frequency - 69 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 76 Leakage current ID021 GFCIDeviceFault(DC) sampling error (DC) Leakage current ID022 GFCIDeviceFault(AC) sampling error (AC) Error in dc component ID023 HwADFaultDCV sampling of load voltage Dc input current ID024 HwADFaultIdc sampling error - 70 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 77 TempFault_HeatSink2 temperature cool/well ventilated place. Ensure inverter protection installed vertically and the Radiator 3 ambient temperature ID052 TempFault_HeatSin3 temperature below inverter protection temperature limit. Radiator 4 ID053 TempFault_HeatSink4 temperature protection - 71 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 78 After correction, inverter will automatically return to its normal state. Check whether the battery Battery overvoltage setting ID070 BatOVP over-voltage inconsistent with battery specification. - 72 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 79 LLC bus ID097 HwLLCBusOVP hardware overvoltage Inverter bus ID098 HwBusOVP hardware overvoltage BuckBoost ID099 HwBuckBoostOCP hardware overflows Battery ID100 HwBatOCP hardware overflows PV hardware ID102 HwPVOCP overflows ID103 HwACOCP Ac output - 73 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 80 5 minutes, then switch failure inverter. Check Permanent Bus whether the problem is hardware solved. ID131 unrecoverHwBusOVP overvoltage please contact failure technical support. PV uneven flow ID132 unrecoverIpvUnbalance permanent failure ID133 unrecoverEPSBatOCP Permanent - 74 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 81 FLASH for 5 minutes, then switch error inverter. Check whether the problem is ID153 SciCommLose(DC) communication solved. please contact error (DC) technical support. ID154 SciCommLose(AC) communication error (AC) ID155 SciCommLose(Fuse) - 75 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 82 BMS UTP temperature problem is resolved. If not, alarm please contact technical Warning of support. overload in ID181 BMS OCP charge and discharge of BMS short circuit ID182 BMS Short alarm - 76 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 83 Please clean the heat sink with an air blower, a dry & soft cloth or a soft bristle brush. Do NOT clean the heat sink with water, corrosive chemicals, detergent, etc. - 77 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 84 5000W 5000W 5000W discharging power Maximum charging 100A 100A 100A 100A current Maximum discharging 100A 100A 100A 100A current Depth of 0-90% DOD adjustable(Lithium-ion) discharge Charging BMS(Lithium-ion) curve Communica CAN(RS485) - 78 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 85 160-5 180-52 200-52 230-52 250-52 250-52 300-52 MPPT voltage range(V) Number MPP trackers Max. input current per 13A/13A MPPT Isc PV (absolute 18A/18A maximum) Maximum inverter backfeed current to array - 79 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 86 46A, overcurrent 10uS 10uS 10uS 10uS 10uS 10uS 10uS protection Nominal grid L/N/PE, 220Vac, 230Vac,240Vac voltage Grid voltage 180Vac~276Vac(According to local standard) range Nominal 50/60Hz frequency Grid Frequency 45Hz~55Hz/55Hz~65Hz range - 80 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 87 User manual HYD 3-6K-EP Power factor 1 default (adjustable+/-0.8) Output THDi (@Nominal <3% output) - 81 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 88 A,60s A,60s A,60s A,60s A,60s A,60s A,60s Duration Max. output 13.6A 18.2A 20.9A 22.7A 22.7A 22.7A current Nominal voltage, L/N/PE, 220V/230V/240V 50/60Hz Frequency THDv <3% (@Liner load) Switch time 10ms(default) - 82 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 89 DC switch PV reverse polarity protection Over current protection Over voltage protection insulation detection Ground fault monitoring Firm frequency Optional response function MOV: Type III standard protection - 83 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 90 Active anti-islandin Reactive Power Disturbance g method Standby self-consum <10W ption Ambient temperature -30℃~60℃(Above 45℃ Derating) range Allowable relative 0~100% humidity range Noise <25dB Max. operating <2000m altitude Cooling Natural - 84 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 91 User manual HYD 3-6K-EP Degree of IP65 protection - 85 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 92 TR321, TR322, EN 50438/EN50549, UTE C15-712-1, NRS 097-2-1, UNE standards 206 007-1 Safety IEC 62109-1/2, IEC 62040-1, IEC 62116, IEC 61727, IEC 61683, IEC standards 60068(1,2,14,30) EN 61000-6-2, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12 - 86 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 93: Quality Assurance

    Terms and - 87 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 94 You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure. Subject to any statutory rights - 88 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 95 Product and will continue until its expiry. In this event, the End User will not receive any new warranty card or be entitled to a further Warranty Period, and the replacement Product(s) will be registered by SOFARSOLAR. - 89 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 96 Product; SOFARSOLAR must be contacted prior to the site visit for authorisation. If the site is not located in a metropolitan area in - 90 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 97 Any damage or defect to the Product is caused any one (1) or more of the following situations (the Dealers or Distributors are responsible and authorized by SOFARSOLAR for the following investigation): Disassembly, attempted repair or modifications performed by any - 91 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 98 Use of the Product in combination with any unauthorised products, equipment or materials as per the user manual, installation guide - 92 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 99 (including the ACL) or cause any part of this clause 4 to be illegal, invalid, void or unenforceable. - 93 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 100 (SOFARSOLAR authorised dealer or distributor) or installer if the Product is defective or faulty. To make a claim under the warranty, the End User must provide the following information and documentation of the faulty or otherwise defective Product: - 94 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 101 Any faults or defects that occur after the expiry of the Warranty Period, or which occur within the Warranty Period but which are listed in the warranty exceptions above, are deemed to be - 95 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 102 Contact us You can directly contact our professional after-sales team: Sofarsolar Ausco Pty Ltd. Tel: +61 401 734 463 / 408 500 386 Shenzhen Sofarsolar Co., Ltd. - 96 - Copyright © Shenzhen SOFAR SOLAR Co., Ltd.
  • Page 103 Version 3.0 ADDRESS 11th Floor, Gaoxingqi Technology Building, District 67, Xingdong Community, Xin’an Street, Bao’an District, Shenzhen, China EMAIL info@sofarsolar.com WEBSITE www.sofarsolar.com...

Table of Contents