Download Print this page

V-TAC VT-1055-1 Instruction Manual

Led flood light

Advertisement

Quick Links

TECHNICAL DATA
MODEL
VT-1055-1
SKU
23697
POWER
1000W
LUMENS
160000Lm
@Sphere360°
COLOUR
6500K
TEMPERATURE
INPUT VOLTAGE AC: 220-240V, 50Hz
DF
>0.9
CRI
>70
LIFE SPAN
25,000 Hours
ON/OFF CYCLE
>15,000 Times
BEAM ANGLE
60°
OPERATION
-20°C to +45°C
TEMPERATURE
BODY TYPE
Diecast Aluminium
DIMENSION
676x74x840mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installation
and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have pur-
chased the product. They are trained and ready to serve you at the best. The
warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593
INSTRUCTION MANUAL
LED FLOOD LIGHT
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
toaccess the manual in
multiple languages.

Advertisement

loading
Need help?

Need help?

Do you have a question about the VT-1055-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for V-TAC VT-1055-1

  • Page 1 This product is warranted for manufacturing defects only. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
  • Page 2 WARNING Please make sure to turn off the power before starting the installation. Installation must be performed by a qualified electrician. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. The external flexible cable or cord of this luminaire cannot be replaced;...
  • Page 3 INSTALLATION INSTRUCTION Turn off the power. Loosen the screws to remove the bracket. Determine the installation location. Drill holes into the building surfaces. Insert wall plugs into the drilled holes. Secure the bracket to the wall by tightening the screws. Install the lamp body onto the bracket and lock it in place by tightening the bracket screws.

This manual is also suitable for:

23697