V-TAC VT-10200 Instruction Manual

TECHNICAL DATA
MODEL
SKU
LUMENS
WATTS
BEAM ANGLE
LONG LIFE
PF
CRI
INPUT POWER
OPERATION
TEMPERATURE
MATERIAL
DIMENSION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty
against damage to any surface due to incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
WARNING
• Please make sure to turn o the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source of this luminaire is not replaceable, when the light source
reaches its end of life the whole luminaire should be replaced.
• If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
• Replace any cracked protective shield.
• Terminal block not included.
• Minimum distance from lighted objects 1m.
• Proper grounding should be ensured throughout the installation.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@VTACEXPORTS.COM
INSTRUCTION MANUAL
LED FLOOD LIGHT
VT-10200
97342
20000 Lm
200W
115°
25000 Hours
>0.9
>70
AC:220-240V,50Hz
-20°C to +45°C
Aluminium
405x326x36mm
PRO
100+
SERIES
LUMENS/W