Advertisement
Quick Links
This assembly manual contains important safety information. Please read and keep for future reference.
Useful Hints Before You Start
1. Read each step carefully before starting.
2. Before beginning assembly, identify, sort and count the parts .
3. Using the wrong screws will cause damage.
4. Using incompatible hardware might cause damage to product.
5. It is important that each step is performed in correct order to avoid di culties.
6. Assemble your furniture on packaging cardboard to prevent scratches or damage.
7. Do not tighten any screws or bolts until the unit is completely assembled.
8. Keep all hardware parts out of reach of children.
Necessary Tools
Screwdriver
Flat Head
Phillips
Screwdriver
Distributed exclusively by COE Distribu ng!
Tel: 800-388-8202 (Mon-Fri | 9am – 5pm EST.)
Model No.: OSOT2448
Description: Rectangle Quartz Occasional Table
CAUTION – Risk of product damage!
Power Drill can be used on lowest
torque setting.
Customer Service
o cesourcefurniture.com
Advertisement
Related Manuals for OfficeSource OSOT2448
Summary of Contents for OfficeSource OSOT2448
- Page 1 Tel: 800-388-8202 (Mon-Fri | 9am – 5pm EST.) o cesourcefurniture.com This assembly manual contains important safety information. Please read and keep for future reference. Model No.: OSOT2448 Description: Rectangle Quartz Occasional Table Useful Hints Before You Start 1. Read each step carefully before starting.
-
Page 2: Hardware List
Please read completely through the instruc ons and verify that all listed parts and hardware are present before beginning assembly. Hardware List Lock Washer (22x) 1/4” x 15 mm Bolt (22x) Flat Washer (22x) Hex Wrench (1x) Parts List OSOT2448T (1x) (Sold Separately) Right Side Panel (1x) Left Side Panel (1x) Top Stretcher (2x) - Page 3 Align and attach the Left Side Panel (2) and Right Side Panel (3) to the Top Position the OSOT2448T (1) upside down on a level and protective surface. Stretcher (4), Center Stretcher (5), and Bottom Stretcher (6) by inserting 15mm Align and attach the frame (2-6) by inserting 15mm Bolts (A), Lock Washer (B), Bolts (A), Lock Washer (B), and Flat Washer (C) through metal plate on Left (2) and Flat Washer (C) through the metal frame.
- Page 4 Please read completely through the instruc ons and verify that all listed parts and hardware are present before beginning assembly. To assemble using OS Laminate Top (OST2448) use the below instructions. Hardware List #8 x 15 mm Screw (12x) Parts List OST2448 (1x) (Sold Separately) Right Side Panel (1x) Left Side Panel (1x)
- Page 5 Align and attach the Left Side Panel (2) and Right Side Panel (3) to the Top Position the OST2448 (1) upside down on a level and protective surface. Stretcher (4), Center Stretcher (5), and Bottom Stretcher (6) by inserting 15mm Align and attach the frame (2-6) by inserting Screw #8*15mm (A), Bolts (A), Lock Washer (B), and Flat Washer (C) through metal plate on Left (2) Lock Washer (B), and Flat Washer (C) through the metal frame.
-
Page 6: Care And Maintenance
Maximum Recommended Weight Loads 300 lbs Care & Maintenance Check bolts/screws periodically and tighten them if necessary. Use a soft, clean cloth that will not scratch the surface when dusting. Clean product with mild cleanser using soft damp cloth. Do not use harsh or abrasive cleanser. Liquid spills should be removed immediately.
Need help?
Do you have a question about the OSOT2448 and is the answer not in the manual?
Questions and answers