Advertisement
Quick Links
This assembly manual contains important safety information. Please read and keep for future reference.
Useful Hints Before You Start
1. Read each step carefully before starting.
2. Before beginning assembly, identify, sort and count the parts.
3. Using the wrong screw will cause damage.
4. Using incompatible hardware might cause damage to product.
5. It is important that each step is performed in correct order to avoid difficulties.
6. Assemble your furniture on packaging cardboard to prevent scratches or damage.
7. Do not tighten any screws or bolt until the unit is completely assembled.
8. Keep all hardware parts out of reach of children.
Distributed exclusively by COE Distributing!
Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.)
Model No.:
OSHA2002
Description:
2 Leg 2 Stage Dual Motor
Customer Service
Advertisement
Related Manuals for OfficeSource OSHA2002
Summary of Contents for OfficeSource OSHA2002
- Page 1 Customer Service Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.) This assembly manual contains important safety information. Please read and keep for future reference. Model No.: OSHA2002 Description: 2 Leg 2 Stage Dual Motor Useful Hints Before You Start 1. Read each step carefully before starting.
- Page 2 Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. Parts List Side Beam (2x) Left Beam Assembly (2x) Right Beam Assembly (2x) Foot (2x) Connecting Beam 2x) Leg (2x) Allen Key (#4&5) Hand Control (1x) Control Box (1x) Guide Tool...
- Page 3 Distributed exclusively by COE Distributing!
- Page 4 Distributed exclusively by COE Distributing!
- Page 5 Distributed exclusively by COE Distributing!
-
Page 6: Care And Maintenance
Maximum Recommended Weight Loads 350 lbs. (Includes Desk Top) Care & Maintenance ▪ Check bolts/screws periodically and tighten them if necessary. ▪ Use a soft, clean cloth that will not scratch the surface when dusting. ▪ Clean the product with mild cleanser using a soft damp cloth. Do not use harsh or abrasive cleanser. ▪... - Page 7 Hand Control Manual 1. Initialization *The initialization procedure must be completed before the first running after installation or any parts are replaced 2. Move up and down 3. Set memory position 1. Memory positions will be erased after initialization 2. Memory positions can be overwritten Distributed exclusively by COE Distributing!
- Page 8 Hand Control Manual 4. Move to memorized positions 5. Move to memorized positions using one touch function 6. Turn on one touch function *one touch function turned on by default 7. Change Imperial and Metric system Distributed exclusively by COE Distributing!
- Page 9 Hand Control Manual 8. Correct display height to desk top Distributed exclusively by COE Distributing!
- Page 10 Hand Control Manual 9a. Setting the upper limit 1. The column cannot run higher than the locked height 2. Setting the upper stroke limit will erase any memory positions higher than the stroke limit 3. The upper stroke limit will be unlocked after initialization 9b.
- Page 11 Hand Control Manual 11. Error codes Distributed exclusively by COE Distributing!
- Page 12 Hand Control Manual 12. Adjusting the sensitivity of the gyro sensor Troubleshooting tips Distributed exclusively by COE Distributing!
Need help?
Do you have a question about the OSHA2002 and is the answer not in the manual?
Questions and answers