Advertisement
Quick Links
This assembly manual contains important safety information. Please read and keep for future reference.
Useful Hints Before You Start
Necessary Tools
Phillips
Screwdriver
Distributed exclusively by COE Distributing!
Model No.:
Description:
Flat Head
Hammer
Screwdriver
Customer Service
Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.)
OSTVALEGM4860
Oblique Leg Mount for 48"
and 60" D Tops
CAUTION – Risk of product damage!
Power Drill can be used on lowest
torque setting.
Advertisement
Related Manuals for OfficeSource OSTVALEGM4860
Summary of Contents for OfficeSource OSTVALEGM4860
- Page 1 Customer Service Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.) This assembly manual contains important safety information. Please read and keep for future reference. Model No.: OSTVALEGM4860 Description: Oblique Leg Mount for 48" and 60" D Tops Useful Hints Before You Start...
- Page 2 Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. Parts List OSTADJMDB(2x) OSTVAMETLEG(6x) OST Top(1x) OSTMBMBC(1x) OSTVALEGM4860(1x) (Sold Separately) (Sold Separately) (Sold Separately) (Sold Separately) Hardware List Allen Key(1x) Wood Screw*20mm(4x) CSK Bolt M6x20mm(1x)
- Page 3 Distributed exclusively by COE Distributing!
- Page 4 STEP 1 OSTVALEGM Place the OSTVAMETLEG or OSTVAWLEG on the top OSTVALEGM, and use Bolts(3) to lightly tighten the OSTVALEG to the top OSTVAMETLEG OSTVALEGM. When everything is in position, then screw in the bolts tightly. STEP 2 OST Top 1.Place OST Top upside down on a clean surface.
- Page 5 STEP 5 5. Fasten the center leg to the top, following step 3, but using hole "B" in the leg. 6. Remove pre - installed end caps from the second leg. Insert through OSTMBMBC, through leg openings, and into OSTADJMDB OSTMBMBC STEP 6 7.
- Page 6 STEP 8 11. With the tables in the upright position, install the metal desk beams over the through OSTMBMBC, as well as through the openings in the third leg. 12. Lightly tighten set screws (4) in the third leg. 13. Insert bolts (11) through beams into OSTMBMBC. STEP 9 14.
- Page 7 Care & Maintenance Distributed exclusively by COE Distributing!
Need help?
Do you have a question about the OSTVALEGM4860 and is the answer not in the manual?
Questions and answers