Dual Zone Operation; Audio Operation - Jensen JDV8035 Installation And Operation Manual

11. DUAL ZONE OPERATION

"2-Zone" Dual A/V Zone Multi Entertainment Operation:
This unit is equipped with the most advance "Dual A/V Zone" feature. This function is useful if the
user would like to select different modes of the Audio and Video (AV) output source for Front and
Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front
speakers and rear speaker for DVD movie. And if the user has One or more TFT screens installed in
the rear seat or inside the Car, the Dual A/V Zone function allow the users to enjoy TWO different
Video sources. For example, on the front in-dash Built-In TFT screen can display the video from the
Game Console and the other screen in the rear seat can display video from DVD Movie or other A/V
source. The detail operation as follow:
On/Off operation
"Off" is the default setting.
Press the "2-Zone" button on the control panel or remote control to switch between Dual
Zone On or Off. The "2-Zone" will appear on the LCD after Dual Zone is selected "on".
To Select Front / Rear AV Sources
Once "ON" is selected, Short Press the "AUDIO" button repeatedly to change between the
F-Zone (Front ) and the R-Zone (Rear) sources.
If Front Zone "F-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN
button to navigate through different modes:
Tuner > DVD > AV - 1 > AV 2 are available for selection for Front AV Output.
If Rear Zone "R-Zone" is selected, user have 10 seconds to use the Volume UP / DOWN
button to navigate through different modes:
Tuner > DVD > AV - 1 > AV 2 are available for selection for Rear AV Output
If no selection is being made within 5 seconds, the unit will resume to the pervious mode.
AV-1 & AV 2 are considered as the same mode / source in the DUAL ZONE function. So if
either the Front or Rear Source is set to AV-1 or AV-2 mode, The other ZONE is not allowed
to select the AV-2 or AV-1 Mode eg: If F-Zone is selected "AV-1", then R-Zone is not allow to
have "AV-2".
To operates function of Front / Rear Sources
The Front Panel & Remote control, is defaulted to control the FRONT source's function /
operation.
When DUAL ZONE is turned "ON", the Mode button is used to change between the Front
Source & Rear Source. Press the mode button repeatedly to change between Front and
The LCD will display the Rear Source mode for 10 seconds. User has 10 seconds to make
the desired operation on the Rear Source's function on the Front Panel or Remote
The LCD will automatically switch back to the Front Source after 10 seconds. And the Front
Panel and Remote now is resumed to operate for Front Source's function again.
The default setting when Dual Zone is "ON"
When DUAL ZONE is turned on, the audio output will be muted for about 1 second.
The default source / mode for Front ZONE is Tuner & for Rear ZONE is "DVD"
The default Volume level is "12" for both Front & Rear ZONE audio output. (or the Volume
Level set as VOL PGM Level set in the Menu)
The LCD display is defaulted to display the Front Mode.
When Dual Zone is "ON", some of the AUDIO FUNCTION WILL NOT BE FUNCTIONAL, THESE
FUNCTION ARE: Bass / Treble / Middle / Balance / Fader / Sub-woofer / iX-bass
The default setting when Dual Zone is in "OFF" mode
The default audio output reverts to what the user selected for the FRONT Zone source
when DUAL ZONE IS "OFF". For example: When the DUAL Zone is "ON ", user has
selected DVD for Front ZONE & Tuner for Rear ZONE. Once DUAL ZONE is turned "OFF",
Audio Output for all 4 speakers becomes "DVD" mode.

12. AUDIO OPERATION

Audio Menu
Short
Press "AUDIO" button to access the Audio Menu. User can navigate thru the Audio Menu
items by pressing the / "AUDIO" button repeatedly, or by pressing the Tuning Up or Tuning Down
Button. Once the desired menu item appears on the display, adjust that option by using the
encoder vloume knob within 5 seconds. The following menu items can be adjusted as described
above. The unit will automatically exit the Audio Menu after five seconds of inactivity.
SUBWOOFER
Sub-woofer (Level)
User has 5 seconds to use the encoder volume knob to adjust the Sub-woofer lever from '00' to
The Sub-woofer level control is only applicable if the unit is equipped with the optional sub-
woofer line out, and only if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer level control option will only appear in the Audio Menu if the "Sub-woofer"
function is activated "ON" by pressing the "Sub-w" button on control panel.
Sub-woofer Low Pass Filter (LPF)
User has 5 seconds to use the encoder volume knob to select the 4 different Low Pass filter
Flat, 80Hz, 120Hz or 160Hz.
The Sub-woofer LPF control is only applicable if the unit is equipped with the optional sub-
woofer line out, and only if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer LPF option will only appear in the Audio Menu if the "Sub-woofer" function
is activated by pressing the "Sub-w" button on control panel.
X-BASS
User has 5 seconds to use the encoder volume knob to select the 3 different Bass Boost
level: Low, Mid, or High.
BASS
BASS LEVEL(Level)
User has 5 seconds to use the encoder volume knob to adjust the desired Bass level range
from -6 to +6.
BASS -CFQ (C.Frq).
User has 5 seconds to use the encoder volume knob to adjust the desired Bass Center
Frequency to 60Hz, 80Hz, 100Hz, or 200Hz.
BASS-Q: (BassQ)
User has 5 seconds to use the encoder vlolume knob to adjust the desired Bass Quality
Factor to 2N, 1N, 1W or 2W.
Figure 1 shows the Bass Quality factor (Curve characteristics) of each step.
15.0
12.5
10.0
7.5
1W
2W
5.0
1N
Level
(dB)
2N
2.5
0.0
10.0 100.0
Frequency (Hz)
E - 10
JDV8035
Figure 1
1.0K 10.0K