Related Manuals for Reina EODT060A
Summary of Contents for Reina EODT060A
- Page 1 This instruction manual applies to the following products: EODT060A/EODT060W, EODT082A/EODT082W, EODT099A/ EODT099W...
-
Page 2: General Safety Instructions
Important! NEVER TOUCH YOUR HEATER OR ⚫ ITS CASING WITH WET HANDS! DO NOT COVER THE HEATER! ⚫ When using any electrical device, be sure to follow basic safety ⚫ precautions, such as the instructions in this instruction manual. General safety instructions PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE ⚫... - Page 3 To prevent a fire, do not block the air inlet and outlet in any way. ⚫ Do not touch hot surfaces. ⚫ Do not insert or allow foreign objects to enter any ventilation or exhaust ⚫ opening as this will cause electric shock or fire and damage the unit. Always make sure your hands are dry before adjusting any switch or ⚫...
- Page 4 The heater must not be located immediately below a socket-outlet. ⚫ When the product is used as fixed heater: The heater is to be installed ⚫ so that switches and other controls cannot be touched by a person in the bath or shower. WARNING: In order to avoid overheating, do not cover the ⚫...
-
Page 5: Description Of Symbols
EODT099W ODET CERAMIC CORE WHITE WIFI 230 V~ 50 Hz 2000W IP24 Class I EODT060A ODET CERAMIC CORE ANTHRACITE WIFI 230 V~ 50 Hz 1000W IP24 Class I EODT082A ODET CERAMIC CORE ANTHRACITE WIFI 230 V~ 50 Hz 1500W IP24... -
Page 6: Wall Mounted Installation
Wall Mounted Installation IMPORTANT! Make sure that there is no electrical wiring or other installation (water pipe for example) near the locations where the holes will be drilled. Be sure to fix the unit vertically and firmly to the wall. This appliance is intended for indoor installation and use only. -
Page 7: Wifi Button
3. Take out the H shape bracket from the back of the product. Put it on the wall and mark the 4 holes' position on the wall as Fig 2. Drill the holes(Φ10) on the wall. 4. Place the anchors into the drilled holes, then fix the H shape bracket on the wall by the 4 screws. Fig 3 5. -
Page 8: Mode Selection
2. Start using - Plug in power supply, the heater enter into standby mode, and show on display. - Press button to turn on the heater, and the heater will enter into comfort mode. Comfort light is on and default setting temperature is 22℃. In any modes, the heating light is on if the heater is heating. - Page 9 6. Week program mode - There are 3 week program modes: P1, P2, P3. - Running as Comfort, ECO or Anti-freeze mode in different day and time. - Comfort, ECO and Anti-freeze temperature is same as the setting in their mode. - P1 program can’t be modified.
-
Page 10: Open Window Function
⚫ flash, press button to select 24, press button to confirm, Comfort, ECO and anti-freeze light flash, press button to select comfort , press button to confirm; ⚫ flash, select , continue to set Tuesday. Repeat the setting until 7 days all are set. - P1, P2 and P3 default setting as below: Comfort: , ECO:... -
Page 11: Factory Resetting
8. WiFi connection - Use Tuya Smart or Smart Life APP for iOS and Android. Search and download “Tuya Smart” or “Smart Life” APP from Apple store or Google play. - By connecting your heater with the iOS/Android device you can do the following: Set on/Stand by ⚫... -
Page 12: Maintenance
Maintenance ALWAYS isolate the unit from the power supply and let it cool before any maintenance. ⚫ Clean the unit at least once a year with a vacuum cleaner to remove any dust from the heap. ⚫ Clean the outside of the device by wiping with a damp cloth and drying with a dry cloth. Never ⚫... - Page 13 Information requirements for electric local space heaters Model identifier(s): EODT060A/ EODT060W Item Symbol Value Unit Item Unit Type of heat input, for electric storage local Heat output space heaters only (select one) manual heat charge control, with P nom Nominal heat output...
- Page 14 Information requirements for electric local space heaters Model identifier(s): EODT082A/ EODT082W Item Symbol Value Unit Item Unit Type of heat input, for electric storage local Heat output space heaters only (select one) manual heat charge control, with P nom Nominal heat output [no] integrated thermostat manual heat charge control with...
- Page 15 Information requirements for electric local space heaters Model identifier(s): EODT099A/ EODT099W Item Symbol Value Unit Item Unit Type of heat input, for electric storage local Heat output space heaters only (select one) manual heat charge control, with P nom Nominal heat output [no] integrated thermostat manual heat charge control with...
Need help?
Do you have a question about the EODT060A and is the answer not in the manual?
Questions and answers