Press MENU, and then press
Press
or
to highlight the item.
Press
or
to select one of "Bright", "Middle" or "Dark" for the balance of back
light.
Press "ENTER" to confirm the adjustment. Press
■ Using "Auto Setting"
Press MENU, and then press
Press
or
to highlight the item.
Press "ENTER" to confirm.
Press
to return.
Note:
This item will auto-adjust the picture display.
■ Using "Phase"
Press MENU, and then press
Press
or
to highlight the item.
Press "ENTER" to confirm and display a status bar as below.
Press
to decrease and press
Press "ENTER" to confirm and return.
Note: This is a feature used for VGA input source.
or
until the "Geometric" menu appears.
to return.
or
until the "Geometric" menu appears.
or
until the "Geometric" menu appears.
to increase it.
43