Remote Control - Akai LCT3226 Operating Instructions Manual

REMOTE CONTROL

4.3 Remote Control
Power ( ): Press to turn on and off.
Mute ( ): Press to mute the sound.
Press again or press VOL+ / VOL- to
restore the sound.
0~9 Number Buttons: Press 0~9 to
select a channel; the channel changes
after 2 seconds.
PIP POS: Press to change the PIP
window position under PIP mode.
SOURCE: Press to select the signal
source, such as TV, AV, S-Video,
Component 1, Component 2, DVI or
VGA.
SLEEP: Press repeatedly until it
displays the time in minutes (5 Min,
10 Min, 15 Min, 30 Min, 60 Min, 90
Min, 120 Min and, OFF) that you
want the TV to remain on before
shutting off. To cancel sleep time,
press SLEEP repeatedly until sleep
OFF appears.
PIP: Press to cycles through the
different POP or PIP modes, such as
Basic PIP, LR POP, and exit.
VOL +/-: Press to adjust the volume.
CH +/- : Press to scan through
channels. To scan quickly through
channels, press and hold down either
channels.
MTS: Press repeatedly to cycle through
the Multi-channel TV sound (MTS)
options: Mono, Stereo and SAP
(Second Audio Program).
◄,▲,▼,►, ENTER: Press ◄, ▲, ▼, ► to move the on-screen cursor. To select an
item, press ENTER to confirm.
SYSTEM: Press repeatedly to cycle through the system options: AUTO and NTSC3.58.
(This button is active for AV, S-Video input source.)
MENU: Press to enter into the on-screen setup menu, press again to exit.
V-CHIP: Press to select the child protect mode.
CCD: Press to select the Closed Caption mode.
FREEZE: Press to freeze the picture, press again to restore the picture.
DISPLAY: Press to display the channel information and it disappear after 3 seconds.
FAVORITE: Press repeatedly to cycle through the favorite channel list.
12
(Continued on next page)