FUNAI DVA-206LX User Manual page 27

Cannot tune in radio
stations
Remote does not function
Disc is not played
Disc is not played
from the beginning
Disc is played automatically
Playback stops automatically
Cannot perform certain func-
tions, such as Stop, GO TO,
Slow Motion Play, Repeat
Play,or Program Play
•
Make sure antennas are securely connected. Adjust the antennas
and connect an external antenna if necessary.
•
The signal strength of stations is too weak (when in Auto Scan
mode). Use manual tuning.
•
No stations have been preset or the preset stations have been
cleared. Preset the stations.
•
Remove any obstacles between the remote control and the main unit.
•
Move closer to the system when operating the remote control.
•
Point the remote control directly at the sensor on the front panel.
•
Replace the batteries.
•
Make sure there is a disc in the tray.
•
Close the disc cover. Make sure the playback side of the disc is
facing down on the disc tray.
•
The disc is skewed or warped.
•
The region code on the DVD does not match the system.
•
Moisture has condensed inside the system. Remove the disc and
leave the system turned on for about half an
•
Program Play or Repeat Play is selected. To cancel Program Play
before playing a disc, press PROGRAM button to display program
play list, select CLEAR button and press ENTER. To cancel Repeat
Play, press REPEAT button until you see "REP OFF" on the display.
•
Resume Play is active. Press STOP button twice and then restart
playing the disc.
•
The DVD features an auto playback function.
•
Some discs contain an auto pause signal. While playing such a disc,
the system stops playback at the auto pause signal.
•
Depending on the disc, some operations may not be available. See
the documentation that came with the disc.
26
hour.