Table of Contents
Advertisement
Chapter 6
Troubleshooting
Frequently Asked Questions
Problem
No power
No picture
Picture noise
DVD picture does not fit
screen on standard television
No sound
Severe hum or noise
No stereo sound during VCD/
CD playback
Solution
•
Make sure the AC power cord is securely connected.
•
Securely connect the video cable.
•
Repair or replace the damaged video cable.
•
Make sure the system is connected to the correct TV input.
•
Make sure the video input on the TV is set to view the DVD system.
•
Make sure the disc is not dirty or flawed.
•
If the picture output is from your system through a VCR to your TV,
any copy-protection signal applied to DVD programs could affect picture
quality. If you still experience problems even when you connect your
system directly to your TV, try to connect your system to your TV's
S-Video input.
•
The aspect ratio of the disc is fixed on your DVD.
•
Securely connect all audio cables.
•
Repair or replace any damaged audio or speaker cable.
•
Press MUTE button on remote control if "MUTE ON" is displayed on the
TV screen.
•
The system is in the mode of Pause, Slow Motion or Forward/Reverse
Scan. Press PLAY button on the remote control to return to normal
playback mode.
•
Make sure all speakers and components are correctly and securely
connected.
•
Make sure to connect cables that are away from a transformer or motor,
and at least 10 feet away from a TV or fluorescent light.
•
Move your TV away from your audio components.
•
The plugs and jacks are dirty. Wipe them with a cloth with moderate
alcohol.
•
Clean the disc.
•
Check speaker connections and settings.
25
Help
Advertisement
Table of Contents
