Table of Contents
Advertisement
Chapter 3
Setup Menu Overview
A f t e r t h e s y s t e m i s p r o p e r l y c o n n e c t e d , i t i s
important to customize the factory preset values for
your particular components and preferences. There
are 4 major categories in the setup menu.
1 LANGUAGE Setup Page
2 VIDEO Setup Page
3 SYSTEM Setup Page
4 RATING Setup Page
Setup Menu Navigation
The following keys are used to display and navigate
within the setup menu:
SETUP
Press to display and exit the Setup menu.
/
Press to move left/right for selection.
ENTER
Press to confirm selection in submenus.
/
Press to move up/down for selection.
Language Setup Page
This setup page enables you to select any of the
available languages for on-screen display (OSD),
system menus as well as subtitle and audio output
for discs. Language options include ENGLISH
(default), GERMAN, SPANISH and FRENCH.
LANGUAGE SETUP
OSD LANGUAGE
ENGL ISH
AUDIO LANG
GERMAN
SUBTITLE LANG
SPANISH
MENU LANG
FRENCH
OSD Language -
Language options for all
on-screen messages and system menus such as
program play lists, info menus and the setup menu.
Audio Language -
Only available when a
multi-language DVD is playing.
Subtitle Language -
DVD has more than one subtitles. Select "OFF" to
remove subtitle from the screen.
Menu Language -
Language options for
disc menus such as disc player menus and title
menus.
T o s e l e c t y o u r p r e f e r r e d l a n g u a g e f o r e a c h
language setting:
1. Press SETUP on the remote control.
2. Select the Language Setup icon.
3. Select one of OSD, AUDIO, SUBTITLE and
MENU LANG.
4. The language options (ENGLISH / GERMAN /
SPANISH / FRENCH) are displayed on the right.
Then select your desired language.
5. Press ENTER to confirm the selection.
Video Setup Page
T h i s s e t u p m e n u a l l o w s y o u t o s e t t h e v i d e o
interface to suit your TV system.
To set up your video interface:
1. Press SETUP on the remote control.
2. Select the Video Setup icon.
3. Select VIDEO.
4. Select CVBS or RGB.
5. Press ENTER to confirm the selection.
Note
Note
System Setup Page
In this setup page, you can set the TV color system,
TV type (aspect ratio) and factory default setting.
Only available if the
15
Setup
VIDEO SETUP
VIDEO
CVBS
RGB
To turn on/off the SCART <RGB> output,
you may adjust the setting as below:
Select CVBS, then SCART will output
CVBS signal.
Select RGB, then SCART will output
RGB signal.
Select CVBS if you connect your TV to the
system with a S-video cable, and SCART
will output S-VIDEO signal normally.
SYSTEM SETUP
TV SYSTEM
NTSC
TV TYPE
PAL
DEFAULT
AUTO
Advertisement
Table of Contents
