Program Type(Pty); Connecting External Aux Input; Connecting Usb Card Reader - FUNAI DVA-206LX User Manual

Table of Contents

Advertisement

Program Type (PTY)
This is an identification to specify the program being
broadcast currently.
Press RDS repeatedly to show the program type.
The program type will be displayed for 6 seconds. If
n o P T Y d a t a o r u n d e f i n e d P T Y d a t a i s b e i n g
transmitted, "NO PTY" or "UNDEFINE" will be
displayed.
The following PTYs can be received on the unit.
"TRAFFIC, NEWS, AFFAIRS, INFO, SPORT,
EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,
POP M, ROCK M, EASY M, LIGHT M, CLASICS,
OTHER M, WEATHER, FINANCE, CHILDREN,
S O C I A L , R E L I G I O N , P H O N E I N , T R A V E L ,
LEISURE, JAZZ, COUNTRY, NATION M, OLDIES,
FOLK M, DOCUMENT, TEST, ALARM".

Connecting External AUX Input

External stereo audio from different kinds of audio
units can be input to the system. The system will
amplify these audio signals and then output at the
speakers. To use this feature:
1 Connect the external audio unit to the AUX IN
socket on the back panel with an audio cable
(not provided) which has a RCA male plug.
2 Press AUX on the front panel or FUNCTION on the
remote control to switch to the AUX IN function.
Before you begin, turn down the volume to
avoid sudden and excessive noise form the
Note
Note
Note
Note
speakers.

Connecting USB Card Reader

This system supports you to play particular files in
audio / video / picture format through a USB card
reader. These files are stored in a memory card in
MP3, WMA, MPEG4, AVI or JPEG format.
1. Insert the memory card into the card reader.
2. Open the cover at the front panel and connect the
card reader to the USB port.
USB CARD READER
The use of an extended USB wire with
FCC/CE approval is recommended.
Note
Note
Note
Note
3. Press FUNCTION on the front panel or remote
control to switch to the DVD function.
4. If the system plays the DVD/CD in the disc tray,
press <
> button on the remote control to read
the files stored in the memory card through the
connected USB card reader.
5. After reading is finished, a disc menu will be
shown on the screen. (For operation about
MP3/JPEG/MPEG4 Playback, please go to page
21.)
Although the system can allow more than
one kinds of memory cards into the card
Note
Note
Note
Note
reader during playback, it is recom-
mended to insert one memory card into
the card reader before connecting it to the
main unit.
19

Advertisement

Table of Contents
loading

Table of Contents