Auto Scan Radio Stations; Listening To The Radio; Adjusting Stereo/Mono; Using The Radio Data System(Rds) - FUNAI DVA-206LX User Manual

If the system reaches a weak station, press
or (-TUNING+) to adjust manually.
Note Note
To change a preset station, simply save
over the previously memorized station.
Press ST/MONO to set the FM Tuner audio
to Stereo or Mono.

Auto Scan Radio Stations

1 Long press PROGRAM on the remote control
until "AUTO SAVE" after "SAVE TO--" appears
on the display.
2 Auto Scan function will proceed. It searches,
and saves stations into Tuner memory
between AM and FM wavebands automatically.

Listening to the Radio

1 Press TUNER on the front panel or FUNCTION
on the remote control to switch to the Tuner (AM
/FM) function.
The last station received is tuned in and its
waveband and frequency are displayed on the
front panel display.
2 To select a preset station, press I
(-Present+) on the remote control to skip to the next
or previous station.
3 To change the tuner waveband, press AM/FM on
the remote control to toggle between AM and FM.
4 T o t u n e i n a n o n - p r e s e t s t a t i o n , p r e s s
or (-TUNING+) on the remote control:
To tune manually, press
repeatedly until the desired station is tuned in.
To tune automatically, press and hold
or (-TUNING+) for 2 seconds, it will
automatically search for stations. If the system
reaches a station, "Tuned" will appear on the
front panel display.
5 To improve reception, relocate the supplied
antennas.

Adjusting Stereo/Mono

If a FM station is noisy, press ST/MONO on
the remote control. "STEREO" will disappear on
the front panel display.
This turns off stereo sound but may improve
reception.
To switch back to stereo, press ST/MONO again.
Not all stations are broadcast in stereo. For those
stations without stereo, pressing the ST/MONO
button has no effect.
Using The Radio Data System
(RDS)

Radio Data System

Radio Data System (RDS) is a broadcasting service
t h a t a l l o w s r a d i o s t a t i o n s t o s e n d a d d i t i o n a l
information along with regular program signals.
This tuner offers convenient RDS features such as
station name display. RDS is available only for FM
stations.

Receiving RDS Broadcasts

Simply select a station from the FM waveband,
and press RDS on the remote control.
RDS information as PS/RT/PTY shows on the
front panel display. If the station provides RDS
services, the station name(PS) will firstly appear
on the front panel display.
Note Note Note Note
or I

RDS Features

RDS is a broadcasting service which allows FM
or (-TUNING+)
stations to send additional information along with
regular radio signals.
The additional information is derived from the
features of RDS described below.
Program Service Station Name
(PS)
The station name is displayed automatically when
a station that provides RDS service is tuned in.
Radio Text (RT)
The service can show text information such as the
title of a song on the display.
Press RDS repeatedly to show the radio text, on
condition if the station to which you are listening,
provides RDS services.
If the station is not transmitiing text information,
"NO RT" will be displayed.
To return to the regular display, press RDS again.
18
RDS may not work properly if the station to
which you are listening is not transmitting
the RDS signal properly, or if the signal
strength is too weak.
Not all FM stations provide RDS service,
nor do they provide the same type of
services.
If you are not familiar with the RDS
s y s t e m , c h e c k w i t h y o u r l o c a l r a d i o
stations for details on RDS services in
your area.