Connections; Connecting The System; Step 1 - Connect Tv; Step 2 - Place Speakers - FUNAI DVA-206LX User Manual

Chapter 2

Connecting the System

Follow these seven steps to connect your DVD
system. It is recommended that you turn off all
components (or unplug AC power) while you are
connecting the system.

Step 1 - Connect TV

Composite Video
Connect the video cable from the Video Out jack
on the back panel of the DVD system to your
television's Video In jack.
S-Video
For better video quality, you can connect the
system to your TV with a S-Video cable (not
included). Connect the S-Video cable from the
S-Video Out jack on the back panel of the
system to your television's S-Video In jack.
SCART Video
You can connect the system to your TV with a
scart cable.

Step 2 - Place Speakers

For the best result, arrange the 2 speakers as
shown in your listening area:
Note Note
L(Left)
11

Connections

Front Speakers (L, R)
Align the front speakers at ear level and at a
horizontal angle of 45 degrees to the primary
listening area.
It's recommended not to connect both SCART
and S-VIDEO signals simultaneously. It may
degrade the video quality because the signals
are shared between the two connectors.
R(Right)