Removing the Modem/LAN Files
Follow these instructions to remove the modem/LAN files.
Double click My Computer and double click drive C:.
Double click the Drivers folder.
Highlight and delete the Modem and LAN folders.
Follow the instructions to remove the Xircom LAN driver.
Removing the Xircom LAN Driver
Follow these instructions to remove the configured Xircom LAN driver from your system.
Right click My Computer, highlight and click Properties.
Select the Hardware tab and click the Hardware Wizard button.
Click Next when the Add/Remove Hardware Wizard screen appears.
Select 'Uninstall/unplug a device' and click Next.
Select 'Uninstall a device' and click Next.
Scroll down to select 'Intel Pro/100+ Mini PCI' and click Next.
Click Yes when the 'I want to uninstall this device' screen appears and click Next.
Click Finish to remove the LAN driver.
Click OK to close the System Properties window.
Restart your computer.
Follow the instructions to install the Xircom LAN driver from the A&D CD
Installing the Xircom LAN Driver
Follow these instructions to install the Xircom LAN driver from the A&D CD.
Once you restart your computer, Windows 2000 automatically detects the ethernet controller.
When the Files Needed screen appears, insert the A&D CD.
Click the Browse button to locate your CD-ROM drive.
Double click through the following path: \Software\Drivers\Xircom\LAN, and click Open.
Click OK to install the LAN driver.
Click Finish to complete the installation.
Click Yes when prompted to restart your computer.
The LAN driver is now installed and ready to use.
NEC Versa SXi Release Notes 3