Installing The Nec Cd-Rw Software; Installing Easy Cd Creator - NEC VERSA LXI Manual

Sliding the CD RW/DVD drive into the NEC VersaBay III
NEC Versa LXi
8. Slide the release lock to the locked position.
Turn the system over, open the LCD panel, and power on the system.
9.

Installing the NEC CD-RW Software

The NEC CD-RW software CD contains two applications that must be installed after installing
the CD-RW/DVD drive into the NEC VersaBay III. The following sections provide the
installation instructions for the applications.

Installing Easy CD Creator

Easy CD Creator is an application that allows you to create data and audio CDs. Follow these
steps to install Easy CD Creator.
In Windows 98, double click on My Computer, then insert the NEC CD-RW software
1.
CD into the drive.
In Windows 2000 and Windows NT, insert the NEC CD-RW software CD into the drive.
The Adaptec Master Setup screen appears. If the CD does not load automatically, do the
following.
T
Double click on My Computer on the Windows desktop.
T
Double click on the CD drive. The Adaptec Master Setup screen appears. Go to step 3.
In Windows 98, the Choose an Option dialog box appears. Select 'Run Adaptec CD-R/RW
2.
software installation program' and click OK. The Adaptec Master Setup screen appears.
3. Click Easy CD Creator.
4. The Adaptec Easy CD Creator Setup appears. Click Next.
The Software License Agreement appears. Click Yes.
5.
The Choose Destination Location dialog box appears. Click Next.
6.
Easy CD Creator is installed. When the installation completes, click Finish.
7.
8. A dialog box appears asking if you want to install Adobe Acrobat Reader to access the
online help provided by Adobe. Click No if Acrobat Reader is installed. Click Yes to install
Acrobat Reader. If you click Yes, Acrobat Reader will be installed after you restart the
system. Follow the on-screen prompts to install Acrobat Reader.
9. The Adaptec Master Setup screen appears. Click Exit. Proceed to the next section.
NEC Versa SXi
NEC VersaBay III CD-RW/DVD Drive 5