Download Print this page

Advertisement

NEC DVD/CD-Rewritable Drive
General Specification
Model : ND-1300A

Advertisement

   Related Manuals for NEC ND-1300A

   Summary of Contents for NEC ND-1300A

  • Page 1

    NEC DVD/CD-Rewritable Drive General Specification Model : ND-1300A...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1.0 PRODUCT DEFINITION 1.1 GENERAL 1.2 PRODUCT DESCRIPTION 2.0 PERFORMANCE 2.1 GENERAL 2.2 SUMMARY OF STANDARD PERFORMANCE 2.2.1 DVD medium 2.2.2 CD medium 2.3 PERFORMANCE 2.3.1 DVD MODES AND BLOCK LENGTH SUPPORTED 2.3.1.1 DVD READABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED 2.3.1.2 DVD WRITABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED 2.3.2 DVD WRITE METHOD SUPPORTED 2.3.3 DVD WRITABLE MEDIA...

  • Page 3

    6.3 AUDIO SIGNAL INTERFACE 6.3.1 ELECTRICAL 6.3.1.1 CONNECTORS 6.3.1.2 OUTPUT SIGNAL CHARACTERISTICS 6.4 DATA BUFFER...

  • Page 4: Product Definition

    1.0 PRODUCT DEFINITION 1.1 GENERAL This drive unit is compatible of play DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, CD-Audio, CD-ROM(mode 1 and mode 2), CD-ROM XA(mode 2, form 1 and form 2), Photo CD(single and mu ltiple sessions), CD Extra, CD-RW, CD-TEXT discs.

  • Page 5

    2.0 PERFORMANCE AND FUNCTIONAL REQUIREMENTS 2.1 GENERAL The performance and functionality of the DVD/CD rewritable drive system is determined in part by the world-wide standards. It is the intention of this document to adhere to these standards unless otherwise specifically noted. A summary of these standard specifications are presented here for reference purposes only.

  • Page 6: General

    DISC RECORDING SURFACES DISC DIAMETER 120 mm or 80 mm DISC CENTER HOLE 15 mm diameter THICKNESS 1.2 mm TRACK PITCH 1.6 microns (15,875 TPI), typical SCANNING VELOCITY 1.2 ~ 1.4 meters/sec (Normal Speed) ROTATION SPEED Varies over radius. ~535 to 198 rpm (Normal Speed). Variable LATENCY (AVERAGE) ~55 to 150 msec (Normal Speed), Variable BLOCKS/ROTATION...

  • Page 7

    2.3.4 CD MODES AND BLOCK LENGTH SUPPORTED 2.3.4.1 CD READABLE FORMAT, MODES AND BLOCK LENGTH SUPPORTED a) Format and Modes Supported CD-Audio(8cm/12cm), CD-ROM(mode 1 and mode 2), CD-ROM XA(mode 2, form 1 and form 2), Photo CD(single or multiple sessions), CD-I(FMV), Video CD, CD Extra., CD-TEXT b) Block Length Supported CD-Audio 2352 and 2368 Bytes...

  • Page 8

    2.3.7 TRANSFER RATE 2.3.7.1 READ SPEED AND TRANSFER RATE USER BYTES/SEC. (SUSTAINED) (1 KBytes = 1024 Bytes) a) DVD-ROM Read Speed and Transfer Rate Single Layer 5-12x CAV 6.9-16.6 Mbytes/sec Dual Layer 3-7x CAV 4.1-10 Mbytes/sec b) DVD-R/-RW/+R/+RW Data tracks Read Speed and Transfer Rate 2-5x CAV 2.7-6.9 Mbytes/sec c) DVD-Video with CSS protection Read Speed and Transfer Rate...

  • Page 9: Quality And Reliability

    2.3.9 ACCESS TIME 2.3.9.1 DVD medium FULL STROKE 5-12x CAV 230 msec (typical) 1/3 STROKE 5-12x CAV 140 msec (typical) RANDOM STROKE 5-12x CAV 140 msec (typical) 2.3.9.2 CD medium FULL STROKE 17-40x CAV 200 msec (typical) 1/3 STROKE 17-40x CAV 120 msec (typical) RANDOM STROKE 17-40x CAV...

  • Page 10: Optical Pickup Actuator Mechanism

    - the drive is in dormant mode (i.e. the laser diode is off and spindle motor not spinning, the drive is power on) for 90% of power on time. 3.3 OPTICAL PICKUP ACTUATOR MECHANISM The drive is capable at least 2,000,000 full stroke seeks. 3.4 MTTR (MEAN TIME TO REPAIR) 30 minutes 4.0 REGULATIONS AND STANDARDS...

  • Page 11

    This drive unit uses IDE interface, which conforms to the Mt. Fuji Commands for CD and DVD Devices: SFF8090v4 rev. 1.00 to communicate with the host computer. IDE interface(ISO X3T9.2 791D) addresses the electrical interface. The ATAPI CD-ROM specification : SFF-8020 Rev.2.6 addresses command protocol. 6.2.2 ELECTRICAL The IDE bus uses single ended drivers and receivers.

Comments to this Manuals

Symbols: 0
Latest comments: