To remove the disc, insert the end of a paper clip into the eject hole and push in until you hear a click. Manually open the drawer. Status LED — lights during data read operations. Do not eject the disc or turn off the NEC Versa when the indicator is lit.
Locating the NEC VersaBay III A - VersaBay III Turn the NEC Versa upside down and locate the release lock. Slide the release lock to the unlocked position. Locate the release latch. Slide the release latch to the unlocked position. (See the following figure.)
If there is a VersaBay III device in the VersaBay III, refer to the instructions in the previous section to remove the device. Turn the NEC Versa upside down and locate the release lock and the release latch (see the previous figure).
If you are reinstalling the NEC SoftDVD Player, a box appears asking, “Would you like to install or reinstall NEC SoftDVD Player Setup?” Click Yes. (If this is the first time you are installing the software, this box does not appear.)
Uninstalling the NEC SoftDVD Player For a Windows 95 system, each component that was installed with the NEC SoftDVD Player has one or more uninstall entries in the Add/Remove Programs window: for DirectX Media: — Microsoft Windows Media Player 5.2 (if IE5.0 was not yet installed) —...
See the following sections for instructions on configuring AC power management correctly for playing DVD movies. For complete DVD player operating instructions, see the online help for the NEC SoftDVD Player. To access the online help while DVD Player is running click the question mark on the DVD Player main menu.
Specifications NEC VersaBay III DVD-ROM drive safety specifications follow and are standard unless stated otherwise. Voltage +5 Vdc +5% ripple voltage (mV peak to peak) 50 maximum Safety Agency Approvals UL 1950 Second Edition CSA 22.2 no. 950 IEC Pub 950/EN 60950...
NEC Versa LXi VersaBay III DVD-ROM Drive 819-200645-000 01/2000 !"#$%&''()*%'''! NEC Versa LXi VersaBay III DVD-ROM Drive...