Saving Battery Power - NEC VERSA 2000 Service And Reference Manual

Insert the new battery pack into the battery compartment. Push the battery pack
4.
into the compartment until it locks into place.
Figure Section 2-6 Battery Pack Replacement
Replace the battery cover.
3.
Exit Suspend mode.
4.

Saving Battery Power

The system utilizes two power conserving states: Active and Suspend mode. The system
automatically switches between these modes to conserve battery power and prolong battery
life. To save additional power, use the following guidelines:
!"
put the system in Suspend mode when you need to leave the system for a short
time
!"
reduce the LCD's brightness using the Fn F5 hot key to toggle the LCD backlight
between standard or full
!"
turn off the system when not in use.
The system also integrates automatic power-saving features. Refer to Table Section 2-7 for
a complete description.