NEC VERSA 2000 Service And Reference Manual page 53

CAUTION: Never load a BUU from another
system model. That system's BIOS will be lost.
Power off the system unit.
1.
2. Insert the BIOS Update Utility diskette into drive A.
Power on the system unit. The unit boots and automatically loads the utility. A
3.
message similar to the following appears:
FLASH ROM EQUIPPED
WARNING: The BIOS Update Procedure
is about to begin, press ENTER to continue.
To abort, remove the diskette and reset the unit.
Press Enter to continue. The utility checks the currently installed BIOS version
5.
and the diskette's BIOS versions. If the BIOS can be updated, the Main Menu
appears (see the following screen). If there is a problem, the appropriate message
is displayed.
NEC BIOS Update Utility
Main Menu
Information
Display BIOS Version
Customize BIOS
Install New BIOS
Restore Original BIOS
Exit