System Board Jumper Settings
The system board has six jumper blocks, as shown on the following
figure. Jumper locations are provided in the following figure. The tables
following the figure provide detailed information on jumper settings and
functions.
system configuration. Only change or check the appropriate jumper
settings. Otherwise, keep the jumpers at their factory settings.
A – USB Keyboard Wakeup (JP2)
B – Keyboard at Power On (JP1)
C – BIOS Recovery (JP15)
Jumpers are set correctly at the factory for the
System board jumper block locations
D – CMOS Clear (JP19)
E – USB Port Selection (JP13)
F – Save to RAM (JP3)
Configuring the System 3-29