A – CD Audio In
B – Secondary IDE Connector
Use the following table when configuring IDE drives on the primary and
secondary IDE connectors on the system board.
Configuration
1 device (hard drive)
2 devices (hard drive,
CD-ROM)
2 devices (hard drive, DVD-
ROM drive)
System board cable connectors
IDE Connector Configuration
Primary connector
Master - hard drive
Slave - none
Master - hard drive
Slave - none
Master - hard drive
Slave - none
C – Primary IDE Connector
D – Diskette Drive Connector
Secondary connector
Master - none
Slave - none
Master - CD-ROM
Slave - none
Master - DVD-ROM drive
Slave - none
Installing Options 4-27