Pyle PDMR6 User Manual

Visit Our Website
PDMR6
6.5'' High Power Midrange Driver
SCAN ME
PyleUSA.com
Speci cations:
• Power Handling:
• RMS Power: 150 Watts
• Peak Power: 300 Watts
• Cone Material: 6.5'' Paper Coating Cone
• Voice Coil: 1'' High-Temperature KAPTON Voice Coil
• Magnet Structure: 25 oz
• Sensitivity: 93dB
• Frequency Response: 200-5KHz
• Impedance: 8 Ohms
• Mounting Depth: 2.76'' (inches)
Installation Instructions
Preparing the Mounting Area:
Ensure that the mounting surface is at and free from debris.
Mounting the Woofer:
Align the woofer with the pre-cut hole.
Use screws to securely fasten the woofer into place.
Make sure the screws are tightened evenly to avoid stress
on the frame.
Wiring:
Connect the positive (+) and negative (-) terminals of the
woofer to the ampli er, making sure that the impedance
matches the system requirements (8 Ohms).
California Prop 65 Warning
WARNING:
This product may expose you to chemicals, which is known to
the state of California to cause cancer, birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
www.PyleUSA.com
USER GUIDE
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs