Page 4
1. Position the cutting guide against the required speaker placement and trace around. 2. Cut out the traced area using a pad saw or other suitable tool. 3. Take the speaker unit out of the packaging and remove the grille. Connect the speaker wire to the appropriate “ ”...
PDIC83T 8’’ In-Wall / In-Ceiling 70V Speaker Flush Mount Low-Pro le Speaker with 70 Volt Transformer (600 Watt) Features: In-Wall / In-Ceiling Speaker System • Built-in 70 Volt Transformer Tapping • Flush Mount, Slim Low-Pro le Design • 2-Way Full Range Stereo Sound •...