Using The Landesk Remote Shutdown And Power On Functions; Updates To Nec Computers Support Service Information - NEC POWERMATE 2000 - RELEASE NOTES 01-2001 Release Note

Using the LANDesk Remote Shutdown and Power On Functions

LANDesk Client Manager has a function that lets the Administrator remotely shut down a Client
computer. Another LANDesk function is available to power the system back up after the remote
shutdown. To enable these LANDesk functions, you must change two settings in the system
BIOS. Use the following procedure to enable the functions.
Note
To enable the LANDesk remote shutdown/power-on functions, LANDesk Client
Manager must be installed before you change the BIOS settings.
1. Power on or reboot the system. Press
Using the arrow keys, select "Security." In the Security menu, use the arrow keys to scroll
2.
down and select "Network Boot Settings." Press
At the "Keyboard/Mouse Lock" option, press
3.
Press
Esc
4. Using the arrow keys, select "Boot" from the main setup menu. In the Boot menu, scroll
down and select "ON PME." Press
Press
5. F10
Reinstalling LANDesk After Using the Windows and Smart Restore Option
In the event you recover your system using the Recovery Boot diskette and Product Recovery
CD and you wish to reinstall LANDesk Client Manager, do not use the Smart Restore feature
from the Advanced Options restore menu (option 1, Windows and Smart restore only) to
reinstall Intel
Series Application and Driver CD.

Updates to NEC Computers Support Service Information

Please note the following updates for the NEC Computers Inc. Web addresses and support
contact numbers.
World Wide Web address:
Support services Web address:
Customer and technical support services:
Fax technical support:
These updates replace the Web addresses and support numbers provided in your
®
PowerMate
poster, and NEC INFO Center.
For a free copy of the limited warranty, please write to NEC Computers Inc., ATTN: Warranty
Department, 2371 S. Presidents Drive, Suite A, West Valley City, Utah 84120.
NEC and PowerMate are registered trademarks of NEC Corporation used under license. Intel and LANDesk
are registered trademarks of Intel Corporation. Microsoft, Windows, and Windows NT are registered trademarks
of Microsoft Corporation. All other trademarks and registered trademarks are the property of their respective
trademark owners. Specifications and information in this publication are subject to change without notice.
2001 NEC Computers Inc.
to return to the main BIOS Setup menu.
and save the BIOS settings.
®
LANDesk. Reinstall LANDesk Client Manager from the NEC PowerMate 2000
2000 Series User's Guide, PowerMate 2000 Series Quick Setup/Quick Reference
F2 during bootup to open the BIOS Setup menu.
.
Enter
. Select "Disable" and press
Enter
Enter . Select "Power on" and press
http://www.neccomp.com
http://support.neccomp.com
800-632-4525
801-579-1552
NEC PowerMate 2000 Series Release Notes 7
.
Enter
Enter .