Table of Contents
Advertisement
Editing the mode settings
▲ or
Highlight the required mode
☛
1 2
➔
For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
When you change any volume setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 64 or "Videos (M61)" on page 64 for
1
Ringer
details.)
Sets the sound volume for incoming calls.
2
Ringer volume
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 64 for details.)
3
SMS tone
Sets the sound volume for incoming SMS messages.
4
SMS tone volume
Selects the ringtone for incoming Mail or MMS messages. (See "Sounds (M62)" on page 64 for details.)
5
Mail tone
Sets the sound volume for incoming Mail or MMS messages.
6
Mail tone volume
Turns on/off the key tone.
7
Key tone
Turns on/off the service tone.
8
Service tone
Sets the sound volume for Clock alarm and Schedule alarm.
9
Alarm volume
Turns on/off the vibrator function.
0
Vibrator
Selects the sound output from Earphone & Speaker or Earphone.
Earphone setting
Settings (M1)
24
➔
SK1
➔
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data in
Phonebook. (See "Allocating a picture as a CLI" on page 55.)
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired headset
and the speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of the
phone is used.
This option affects the wired headset.
Press the appropriate number for the required setting in the following table.
Advertisement
Table of Contents
