Table of Contents
Advertisement
Call waiting and holding (M162)
This facility informs you that another call is being made to your phone while an existing call is in progress.
Setting up call waiting
☛
1 1 to activate, 1 2 to deactivate the call waiting, or 2 to check the status of call waiting.
➔
1 6 2
Using call waiting
☛
If you are on a call and another comes in, you will be alerted by a beep in the earpiece
☛
To switch the calls, SK1
To merge the calls, SK2 (see "Multi-party calls" on page 10).
☛
☛
To end the current call,
☛
To retrieve the held call SK1
Auto redial (M163)
With the auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone
cannot connect a call if the other party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.
☛
1 to activate or 2 to deactivate the auto redial facility.
➔
1 6 3
If the tenth attempt still fails, the number will be added to the blacklist (See "Redial blacklist" on page 12.).
Line ID (M164)
The line ID (identification) facility is network dependent.
The line ID facility enables you to choose whether or not to send your own phone number when you make a call
and also whether or not to display a caller's phone number when you receive a call.
☛
1 6 4 to display the Line ID screen with a ✔ over an activated line and a ✘ over a deactivated line.
☛
To set the status of each line (see the table on the right), highlight a line (the line will flash when selected).
☛
SK1 to set the line identification on or off
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix
a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
Hold down 0. The 0 character displayed will change to a + character
☛
Basic Calls & Phone Use
14
to save the current settings.
➔
Key in the country code, area code, and phone number that you wish to call.
➔
SK1 to accept the incoming call.
➔
Line type Setting
Outgoing Send own #
Incoming Show Incoming #
Show connected #
Return own #
Advertisement
Table of Contents
