Table of Contents
Advertisement
Using Bluetooth for voice/modem
To use the Bluetooth headset/hands-free kit or Bluetooth modem, you must perform the Bluetooth pairing with your external device beforehand. For
details, refer to the operation manual of the device.
While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone.
Indicates Bluetooth On.
Connecting Bluetooth headset/hands-free kit
When connecting a wired headset and Bluetooth headset at the same time, the wired headset will work partially (only its button will work).
For some Bluetooth devices, the voice recall function may be activated when a paired headset/hands-free kit is turned on (see "Voice recall" on
page 8).
☛
Pair the Bluetooth device and your phone beforehand (see "Pairing a Bluetooth device and your phone" on page 82 for details)
☛
3 to display the Device list screen
8 9 1
➔
Using Bluetooth headset/hands-free kit
☛
To answer the incoming call, press the button on the headset/hands-free kit
To switch the headset/hands-free kit call to your handset call during a call,
☛
You cannot deactivate Bluetooth during a call.
☛
To end the call,
or end from the headset/hands-free kit
Using your phone as Bluetooth modem
For details of dial-up connection settings, consult your Internet service provider.
☛
Pair the Bluetooth device and your phone beforehand (see "Pairing a Bluetooth device and your phone" on page 82 for details)
1 to toggle to Bluetooth On to activate Bluetooth
☛
8 9 1
➔
☛
To end the dial-up connection, disconnect from the PC application
You can also end the dial-up connection by pressing
Bluetooth Object Push
You can send/receive the data from Phonebook/Scheduler/ToDo list/Notepad/My data (Videos/Sounds/Pictures/MP3) between other Bluetooth devices.
The maximum data size for the Object push service is 6 MB for MP3 and 1MB or less for other files depending on the file type. Any files too large will
be displayed in gray and not be available.
While sending or receiving data via Bluetooth, your phone is automatically placed out of service, so phone call, message and i-mode access are
disabled.
Indicates that Bluetooth is active.
Highlight the headset/hands-free kit in the list
➔
Perform dial-up connection by your PC
➔
8 9 1 6
SK1 or
➔
9
83
Bluetooth (M89)
Advertisement
Table of Contents
