NEC MOBILEPRO 780 User Manual page 78

Tap to place a check mark in the box "Display LCD on
3.
External Monitor," and tap OK.
Use the soft reset button to reset the MobilePro and
4.
implement the new setting. For instructions about reset-
ting the MobilePro, refer to the section, "Resetting the
MobilePro," in Chapter 4.
Power off the MobilePro.
5.
6. Locate the VGA port cover on the left side of the
MobilePro and open it.
7. Align and attach the connector on the MobilePro VGA
cable to the VGA port on the left side of the Mo-
bilePro.
Connecting the VGA cable
A – VGA port B – VGA cable
8. Connect the other end of the VGA cable to the monitor
cable connector.
Using the NEC MobilePro 4-13