NEC MOBILEPRO 780 User Manual page 107

Insert the Bonus Software CD to the CD-ROM drive
1.
in your host PC.
!"
If auto insert is enabled on your host PC, the CD
automatically plays and the introduction screen
appears.
!"
If auto insert is not enabled, tap Start, Run, browse
for the CD-ROM drive, and run the setup file.
2. Move your cursor over the application list at the left
side of the screen to select an application for installa-
tion.
Click the selected application title to initiate the instal-
3.
lation program.
Read the license agreement, that only appears the first
4.
time that you launch the Bonus Software CD, and
click OK.
5. Follow the on-screen instructions to install the
software applications.
Note:
When installing some applications from
the NEC Bonus Software CD using a Windows NT
host PC, the installation process may proceed
slowly. The progress bar that appears on the screen
during installation may seem to stop for a period of
30 to 90 seconds. Be patient! This is normal and the
installation process will complete successfully.
Once installed on your NEC MobilePro, the software ap-
plication is stored in RAM. Refer to each application's
online help for details about how to use the application.
Introducing Windows CE 3-13