NEC MOBILEPRO 780 User Manual page 125

Note:
the MobilePro automatically powers on when you
open the display panel.
The first time you power on the MobilePro, the
screen contrast may need adjustment. Refer to the
following section, "Making Display Panel Adjust-
ments," for details.
If the MobilePro is not used for a specific length of time, it
automatically shuts off. You can select how long the unit
remains on through the Power selection in the Windows
Control Panel. On the Windows CE desktop, go to Start,
Settings, Control Panel. Double tap the Power icon and se-
lect the Power Off tab to designate a power off time.
Note:
back up and synchronize data between your Mo-
bilePro and your host PC.
Synchronization occurs each time you connect your
MobilePro to your host PC, once initial synchroniza-
tion is configured. For details, see the section in
Chapter 1, "Connecting to Your PC."
For details about backing up and restoring data, see
the section in Chapter 3, "Backup Up and Restoring
Data."
MAKING DISPLAY PANEL ADJUSTMENTS
You can adjust the brightness of the display panel in the
NEC MobilePro using two function keys located at the top
right of the keyboard. Increasing panel brightness can
dramatically lower battery life.
A – Power button
The first time you install the main battery,
As a general operation rule, frequently
Using the NEC MobilePro 4-3