Table of Contents
Advertisement
Configuring a Remote Access
Server
Once you establish an account with your RAS and gather the
necessary configuration information, you are ready to create a
connection on your MobilePro for your RAS account.
Follow these steps to create a new connection for your RAS
account.
1. Tap Start, Programs, Communication, then select Remote
Networking.
2. Double tap the Make a New Connection icon.
3. Enter a name for the new connection.
4. Select Dial-Up Connection as the connection type and tap
Next.
5. Use the dropdown box to select Internal Modem on COM
4 and tap Configure.
6. Select the required port settings and call options. Tap OK.
7. Tap TCP/IP Settings and configure the required General
Settings and Name Servers. Tap OK.
8. Tap Next and enter the required dial-up telephone
number. Tap Finish.
Once your RAS connection is established you can configure
your MobilePro to send and receive email through your RAS.
Follow the instructions in "Sending and Receiving Email"
and "Activating a Connection," later in this chapter, to send
and receive email through your RAS.
Setting Up a Remote Connection 3-5
Advertisement
Table of Contents
